DT250 1974 back from the brink

MrBernzo
Topic Author
Offline
Elite Member

Posts: 212
Likes received: 115

Replied by MrBernzo on topic Re:DT250 1974 back from the brink

Finished the seat tonight. Will be able to access the oil tank and use the original seat lock. Getting close to on road now!

This image is hidden for guests.
Please log in or register to see it.

Sent from my Moto G Play using Tapatalk

24 Feb 2019 02:15 #91

Please Log in or Create an account to join the conversation.

RT325
Offline
Platinum Member

Posts: 10828
Likes received: 4695

Replied by RT325 on topic Re:DT250 1974 back from the brink

Just wondering if you built up the steering stops because when i did a similar thing with my earlier model RT2 the forks came around & hit the tank because the triples of the leading axle forks are set back equal to axle moved forward on the lower sliders. Me being a rough B$@#$d i just whacked it onto full lock both ways & put perfect dents in the tank--well i needed full lock when power sliding--my excuse. Love your bike!! & those rear shocks.

24 Feb 2019 03:32 #92

Please Log in or Create an account to join the conversation.

MrBernzo
Topic Author
Offline
Elite Member

Posts: 212
Likes received: 115

Replied by MrBernzo on topic Re:Re:DT250 1974 back from the brink

I drilled and tapped holes on the lugs on the bottom triple clamp, then inserted a bolt to reduce the amount of steering lock. This is going to be a road going bike so I will not need full lock for everyday riding.

Sent from my Moto G Play using Tapatalk

24 Feb 2019 11:44 #93

Please Log in or Create an account to join the conversation.

NOTICE: If you are not a free registered member of the site, you will not see the photos in the forum, and you won't be able to access our premium member content. Please consider joining our community! REGISTER AND MAKE THIS BOX DISAPPEAR!

Pictures Posting Not Working (12 Jun 2023)