facebook1 youtube1 twitter1 instagram linkedin1 pinterest1

NOTICE:  If you are not a free registered member of the site, you will not see the photos in the forum, and you won't be able to access our premium member content. Please consider joining our community! REGISTER AND MAKE THIS BOX DISAPPEAR!

×

Pictures Posting Not Working (12 Jun 2023)

Picture uploads is again unavailable. We are working on the problem. Thanks for your patience.

Makotosun

1978 DT125 revival

  • yamaben
  • yamaben's Avatar Topic Author
  • Away
  • New Member
  • New Member
  • Posts: 3
  • Likes received: 0

1978 DT125 revival was created by yamaben

I bought a '82 DT100 recently, rode it around a bit and realized this bike is tiny! I'm 5'11" but look (and feel) like a circus monkey on it.
What I didn't know, is the US did not get the "adult" size DT100 after 1976. D'oh.
I think it's even smaller than my DT50MX was, but definitely way smaller than a DT80LC or LC2.
I moved on to find a DT125 or DT175 that's a better fit for me.
They're almost impossible to find in New England. I don't just mean in good condition, but any examples in any kind of condition.
That means I could not be picky.
It's missing the gauges and the ignition switch plus a few small things here and there.
Oh and it's also missing the complete top end, I don't know what happened to it. Story goes it had no compression.
I am assuming the previous owner started parting it out.
I was still optimistic because the bottom end had shop towels stuffed in it, so maybe it's all good?
Nah, bunch of rusty oily watery sludge in the crankcase.
Well I guess this is where I'm starting from, but it's all good news from here (hopefully?). If I can figure out how to upload images I'll add a couple.
Last edit: 19 Nov 2026 15:05 by yamaben.
19 Nov 2026 15:03 #1

Please Log in or Create an account to join the conversation.

  • yamaben
  • yamaben's Avatar Topic Author
  • Away
  • New Member
  • New Member
  • Posts: 3
  • Likes received: 0

Replied by yamaben on topic 1978 DT125 revival

Let's see if this works. New connecting rod kit, all new bearings and seals have been ordered.
The OEM 2N4 conrod was surprisingly hard to find (actually it's still on backorder, I hope it actually shows up)
I also sourced a used cylinder and head from eBay - first cylinder that came was already on the 4th oversize that was conveniently left out of the listing.
But the second cylinder worked out. I bought a +0.50 piston and rings for it so we can start with a fresh bore.
Once it's all here I can start looking for a machine shop to bore the cylinder and press in the new connecting rod.

<blockquote class="imgur-embed-pub" lang="en" data-id="a/KQSsk0Y" ><a href="//">1978 DT125</a></blockquote><script async src="//" charset="utf-8"></script>


 
Last edit: 19 Nov 2026 15:27 by yamaben.
19 Nov 2026 15:25 #2

Please Log in or Create an account to join the conversation.

Moderators: yamadmin, Makotosun, DEET, Vinnie, James Hart