facebook1 youtube1 twitter1 instagram linkedin1 pinterest1

NOTICE:  If you are not a free registered member of the site, you will not see the photos in the forum, and you won't be able to access our premium member content. Please consider joining our community! REGISTER AND MAKE THIS BOX DISAPPEAR!

×

Pictures Posting Not Working (12 Jun 2023)

Picture uploads is again unavailable. We are working on the problem. Thanks for your patience.

Makotosun

CT3 Clutch & Shift Question

  • Posts: 14506
  • Likes received: 10720

Replied by MarkT on topic CT3 Clutch & Shift Question

Nice work!  Congratulations!!! 

This image is hidden for guests.
Please log in or register to see it.

1963 YG1-T, 1965 MG1-T, Allstate 250, 1970 CT1b, 1971 R5, 1973 AT3MX, 1974 TS400L, 1975 RD350, 1976 DT175C, 1976 Husqvarna 250CR, 1981 DT175G, 1988 DT50, 1990 "Super" DT50, 1991 RT180, 2017 XT250
05 Sep 2021 15:23 #41

Please Log in or Create an account to join the conversation.

  • Posts: 10828
  • Likes received: 4695

Replied by RT325 on topic CT3 Clutch & Shift Question

If the pressure plate doesn't have splines to grab the center then you need a steel in last. Think you ended up with a fiber if i read your last comment right. BUT--its working good so leave it alone until you 'need' to take the cover off. Just means the drive is taken up on the spring post but it'll survive. Enjoy it now!!.
05 Sep 2021 16:10 #42

Please Log in or Create an account to join the conversation.

Moderators: yamadmin, Makotosun, DEET, Vinnie, James Hart