facebook1 youtube1 twitter1 instagram linkedin1 pinterest1

NOTICE:  If you are not a free registered member of the site, you will not see the photos in the forum, and you won't be able to access our premium member content. Please consider joining our community! REGISTER AND MAKE THIS BOX DISAPPEAR!

×

Pictures Posting Not Working (12 Jun 2023)

Picture uploads is again unavailable. We are working on the problem. Thanks for your patience.

Makotosun

CT-1 Clutch issues.

  • PDXtyist
  • PDXtyist's Avatar Topic Author
  • Offline
  • Content Contributor
  • Content Contributor
  • Posts: 99
  • Likes received: 20

Replied by PDXtyist on topic CT-1 Clutch issues.


Ok MarkT. I bought some OEM frictions and springs to be sure.
I’ll need to make up my mind on the rubber rings.
Thank you.
07 Sep 2020 12:32 #21

Please Log in or Create an account to join the conversation.

  • PDXtyist
  • PDXtyist's Avatar Topic Author
  • Offline
  • Content Contributor
  • Content Contributor
  • Posts: 99
  • Likes received: 20

Replied by PDXtyist on topic CT-1 Clutch issues.

MarkT,
Just remembered I had some new EBC frictions (In photo next to CT’s) for my TY175C. I looked at them and realized that the frictions on the CT are very worn out and almost completely smooth.
I ordered some OEM frictions and springs to be sure.

Tnx
Last edit: 07 Sep 2020 12:47 by PDXtyist. Reason: Too many pics.
07 Sep 2020 12:46 #22

This message has an attachment image.
Please log in or register to see it.

Please Log in or Create an account to join the conversation.

  • PDXtyist
  • PDXtyist's Avatar Topic Author
  • Offline
  • Content Contributor
  • Content Contributor
  • Posts: 99
  • Likes received: 20

Replied by PDXtyist on topic CT-1 Clutch issues.

MarkT.
Ordered some OEM frictions and springs to be sure.
I remembered I had some new EBC plates for my TY175C. Comparing them to the ones from the CT show how worn out and smooth the CT’s are.
Tnx.
07 Sep 2020 12:51 #23

This message has an attachment image.
Please log in or register to see it.

Please Log in or Create an account to join the conversation.

  • PDXtyist
  • PDXtyist's Avatar Topic Author
  • Offline
  • Content Contributor
  • Content Contributor
  • Posts: 99
  • Likes received: 20

Replied by PDXtyist on topic CT-1 Clutch issues.

Installed OEM friction plates. Clutch works well. Problem solved.
FYI, friction plates we replaced were very worn out and were made out of a phenolic type material vs. thé OEM’s which are made of metal.
The following user(s) Liked this Post: Rick C., MarkT
24 Sep 2020 14:40 #24

Please Log in or Create an account to join the conversation.

Moderators: yamadmin, Makotosun, DEET, Vinnie, James Hart