×
Pictures Posting Not Working (12 Jun 2023)
Picture uploads is again unavailable. We are working on the problem. Thanks for your patience.
Makotosun
Re:Just got a new project
- Mothersbaugh
- Offline
- Platinum Member
- Posts: 1661
- Likes received: 1056
Replied by Mothersbaugh on topic Re:Just got a new project
Capt Dave in Robles CA was selling some for a while there. I haven't been around for 8 mos or so. Is Capt. Dave still with us on the forum?
08 Apr 2020 10:39
#41
Please Log in or Create an account to join the conversation.
- Godlygaz
- Topic Author
- Offline
- Senior Member
- Posts: 46
- Likes received: 14
Replied by Godlygaz on topic Re:Just got a new project
Ok so here's the trick... I was told to NOT put anything behind the bolt for it to resemble to official tool.
The trick: use the M10 bolt do it up tight then smack it with the biggest hammer you can find and smack it as hard as you can ( way harder than I was comfortable) and it pops right off
Sent from my POCOPHONE F1 using Tapatalk
The trick: use the M10 bolt do it up tight then smack it with the biggest hammer you can find and smack it as hard as you can ( way harder than I was comfortable) and it pops right off
Sent from my POCOPHONE F1 using Tapatalk
09 Apr 2020 02:00
#42
Please Log in or Create an account to join the conversation.
- Godlygaz
- Topic Author
- Offline
- Senior Member
- Posts: 46
- Likes received: 14
Replied by Godlygaz on topic Re:Just got a new project
Where I currently am..... This scary bits now!
This image is hidden for guests.
Sent from my POCOPHONE F1 using Tapatalk
This image is hidden for guests.
Please log in or register to see it.
Sent from my POCOPHONE F1 using Tapatalk
11 Apr 2020 00:14
#43
Please Log in or Create an account to join the conversation.
- RT325
- Offline
- Platinum Member
- Posts: 9740
- Likes received: 3982
Replied by RT325 on topic Re:Just got a new project
Have my puller bolt somewhere but its cold outside--well not really but i'm sitting in front of the fire. Oh, ok then i'll go & get cold.
11 Apr 2020 00:35
#44
Please Log in or Create an account to join the conversation.
- RT325
- Offline
- Platinum Member
- Posts: 9740
- Likes received: 3982
Replied by RT325 on topic Re:Just got a new project
``10x1.25 pitch.
Nose bit is 31mm long & 5.5mm diameter. 10mm bit is 87mm long. I think the nose bit bottoms out in the hole so the 100mm bit doesn't contact the end of the taper. I think a 10mm 1.25 pitch good tensile strength bolt would still do the job ok pushing on the end of the shaft if you were stuck but i'd taper the first few threads a little to avoid a problem when you smack the bolt after tightening as might try & swell the end of the bolt then be difficult to wind out without a fight.
The following user(s) Liked this Post: MarkT
This message has attachments images.
Please log in or register to see it.
Please Log in or Create an account to join the conversation.
- Godlygaz
- Topic Author
- Offline
- Senior Member
- Posts: 46
- Likes received: 14
Replied by Godlygaz on topic Re:Just got a new project
You have a very rare item there!!
Sent from my POCOPHONE F1 using Tapatalk
Sent from my POCOPHONE F1 using Tapatalk
11 Apr 2020 11:19
#46
Please Log in or Create an account to join the conversation.
- shyted
- Offline
- Site Supporter
- Posts: 1052
- Likes received: 662
Replied by shyted on topic Re:Just got a new project
Are they high impact safety socks you 've got on there ?
The following user(s) Liked this Post: Mothersbaugh, KennyV
11 Apr 2020 15:44
#47
Please Log in or Create an account to join the conversation.
- Godlygaz
- Topic Author
- Offline
- Senior Member
- Posts: 46
- Likes received: 14
Replied by Godlygaz on topic Re:Just got a new project
Doesn't look like mine has a circlip on the short pin here.... Is this normal ?
This image is hidden for guests.
Sent from my POCOPHONE F1 using Tapatalk
This image is hidden for guests.
Please log in or register to see it.
Sent from my POCOPHONE F1 using Tapatalk
13 Apr 2020 06:34
#48
Please Log in or Create an account to join the conversation.
- Godlygaz
- Topic Author
- Offline
- Senior Member
- Posts: 46
- Likes received: 14
Replied by Godlygaz on topic Re:Just got a new project
The reason I ask is that I cannot for the life of me get 5th gear to kick ick but it doesn't look anatomically possible from the drum selector?
It's goes 1-N-2-3-4
Surly that doesn't constitute a 5 gear transmission?
Sent from my POCOPHONE F1 using Tapatalk
It's goes 1-N-2-3-4
Surly that doesn't constitute a 5 gear transmission?
Sent from my POCOPHONE F1 using Tapatalk
13 Apr 2020 07:50
#49
Please Log in or Create an account to join the conversation.
- Godlygaz
- Topic Author
- Offline
- Senior Member
- Posts: 46
- Likes received: 14
Replied by Godlygaz on topic Re:Just got a new project
To add pain to the already painful situations.
After a combined wait of 2.5 months ordering not one but 2 clutch baskets from the USA. Both of which have turned up broken.
Anyone by chance have one in the UK?
This image is hidden for guests.
Sent from my POCOPHONE F1 using Tapatalk
After a combined wait of 2.5 months ordering not one but 2 clutch baskets from the USA. Both of which have turned up broken.
Anyone by chance have one in the UK?
This image is hidden for guests.
Please log in or register to see it.
Sent from my POCOPHONE F1 using Tapatalk
06 May 2020 04:14
#50
Please Log in or Create an account to join the conversation.
Moderators: yamadmin, Makotosun, DEET, Vinnie, James Hart