facebook1 youtube1 twitter1 instagram linkedin1 pinterest1

NOTICE:  If you are not a free registered member of the site, you will not see the photos in the forum, and you won't be able to access our premium member content. Please consider joining our community! REGISTER AND MAKE THIS BOX DISAPPEAR!

×

Pictures Posting Not Working (12 Jun 2023)

Picture uploads is again unavailable. We are working on the problem. Thanks for your patience.

Makotosun

CT3-primary drive seal plate

  • Posts: 1031
  • Likes received: 1643

Replied by Pete-RT1 on topic CT3-primary drive seal plate

I always take loads of photos when I do work on my bikes, here it is fitted on my CT3.
When yo put he cover back on make sure you have the shim on the tacho drive, it's easy to miss.
 
Yamaha CT1 007
Yamaha CT1-B The Greenie
Yamaha CT1-B The Doppelgänger
Yamaha CT1-C
Yamaha AT1-C
2020 Honda CB500X
The following user(s) Liked this Post: MarkT, Jack
18 Sep 2021 10:20 #11

This message has an attachment image.
Please log in or register to see it.

Please Log in or Create an account to join the conversation.

  • ksours
  • ksours's Avatar Topic Author
  • Offline
  • Premium Member
  • Premium Member
  • Posts: 122
  • Likes received: 25

Replied by ksours on topic CT3-primary drive seal plate

Mark: That makes sense as the engine rotation will have a tendency to pull in on the air side and out on the oil side. Common sense- thx
18 Sep 2021 11:25 #12

Please Log in or Create an account to join the conversation.

  • Posts: 10828
  • Likes received: 4695

Replied by RT325 on topic CT3-primary drive seal plate

Fit two opposite each other. They still escape with one if there an explosion in the crankcase & bend the plate out & away. Rare case though. New tight fitting seal will be good.
18 Sep 2021 16:13 #13

Please Log in or Create an account to join the conversation.

Moderators: yamadmin, Makotosun, DEET, Vinnie, James Hart