facebook1 youtube1 twitter1 instagram linkedin1 pinterest1

NOTICE:  If you are not a free registered member of the site, you will not see the photos in the forum, and you won't be able to access our premium member content. Please consider joining our community! REGISTER AND MAKE THIS BOX DISAPPEAR!

×

Pictures Posting Not Working (12 Jun 2023)

Picture uploads is again unavailable. We are working on the problem. Thanks for your patience.

Makotosun

3D Printed DT-1 airbox

  • Posts: 1412
  • Likes received: 694

Replied by AirborneSilva on topic 3D Printed DT-1 airbox

That makes two of us Wes!  I hope to one day get me a 3D printer, one of my plans is to print the plastic piece that goes in the front of the carb on my GT80 and connects to the intake.  The one I have is in good shape but figure spares would be a good idea.  I of course would need someone smart enough to 3D model it as I don't have a clue on how to do that.   
2023 Tenere T7
1976 DT400C
1975 DT400B
1973 RT3
1981 DT175H
1980 GT80
1972 CT2
The following user(s) Liked this Post: Ht1kid
12 Jul 2025 09:43 #11

Please Log in or Create an account to join the conversation.

  • fmxr47
  • fmxr47's Avatar Topic Author
  • Offline
  • Senior Member
  • Senior Member
  • Posts: 40
  • Likes received: 56

Replied by fmxr47 on topic Re:3D Printed DT-1 airbox

This image is hidden for guests.
Please log in or register to see it.


This image is hidden for guests.
Please log in or register to see it.


Installed the airbox late tonight. I will take a look at the carburetor tomorrow and try running it.


Sent from my iPhone using Tapatalk
The following user(s) Liked this Post: MarkT, swm, JayB, AirborneSilva, Ht1kid
14 Jul 2025 21:55 #12

Please Log in or Create an account to join the conversation.

  • fmxr47
  • fmxr47's Avatar Topic Author
  • Offline
  • Senior Member
  • Senior Member
  • Posts: 40
  • Likes received: 56

Replied by fmxr47 on topic Re:3D Printed DT-1 airbox

youtube.com/shorts/iaAhSrm4UFs?si=BgPM2qeH3qq8XB4I

Float height was so far off, the pilot jet wasn’t not even getting fuel. Adjusted that, checked the needle which was in the leanest setting and bumped it to the middle position. Choked off the air screw about 1 turn( still need to go up a size on the pilot jet). Running so good the clutch is slipping when it gets in the power. Way more responsive than I remember it being last time I rode it with the pod street filter on it.

I’m hoping a richer pilot will get the idle to drop a little quicker. 40:1 fuel at the moment.


Sent from my iPhone using Tapatalk
The following user(s) Liked this Post: AirborneSilva, pahiker
15 Jul 2025 10:17 #13

Please Log in or Create an account to join the conversation.

Moderators: yamadmin, Makotosun, DEET, Vinnie, James Hart