Thanks again for the information.

Today I finally received the additional images I required that showed the colours.

As you can see from the images that I’ve uploaded, the colours for the stator seem to be a match for the most part, beside them containing white stripes. The socket on the harness has two black wires going into 1 pin while the stator cable only has one. – I think this is perfectly fine and should work.

Due to the Wiring Harness being originally for a “Yamaha DT100C” they didn’t have a Tachometer so it used the Speedometer as a place to put the “Neutral”, “High Beam”& “Flasher Pilot Light” together this required 4 bulbs. I still wish to use my Tachometer but I assume I could use those in its place, but I still require an additional one for my Speedometer. Would this Wiring Harness be capable of doing it without modification? Also due to the Tachometer being functionality mechanical and utilizes a Tachometer cable Ass'y, I don't think I am missing anything else to get this working. - Or am I?

Thanks for making me aware that the DT100C is shorter than the DT125. I am not sure how I would definitively know if the size would be an issue, but I suppose I should start from the front when starting the wiring process.

I could be wrong so please let me know, as I am a newbie.
 

More Images.

More Images