×
Pictures Posting Not Working (12 Jun 2023)
Picture uploads is again unavailable. We are working on the problem. Thanks for your patience.
Makotosun
DT400B (US import) - Handlebars
- DT Tim
- Offline
- Premium Member
- Posts: 115
- Likes received: 55
Replied by DT Tim on topic DT400B (US import) - Handlebars
I'd be happy with that match, good find
This image is hidden for guests.
This image is hidden for guests.
Please log in or register to see it.
10 Mar 2021 23:49
#31
Please Log in or Create an account to join the conversation.
- Wessi
- Offline
- Elite Member
- Posts: 171
- Likes received: 116
Replied by Wessi on topic DT400B (US import) - Handlebars
i carefully read all the posts in this thread. Before, i was happy with my Yambits handle bars, only noticed sitting too much forward...
After Yammiyammie´s post, i noticed how far from original this aftermarket bars are, so i looked for used bars to re-chrome.
Yesterday it arrives from US, announced as "taken from a 1974 DT 250, what parts no is the same as for my 1875 DT 250.
Hope it´s true, seems a bit narrow to me,
Width is around 74 cm /29 Inch.
Could somebody please let me know, it this is correct ?
Thank you in advance.
After Yammiyammie´s post, i noticed how far from original this aftermarket bars are, so i looked for used bars to re-chrome.
Yesterday it arrives from US, announced as "taken from a 1974 DT 250, what parts no is the same as for my 1875 DT 250.
Hope it´s true, seems a bit narrow to me,
Width is around 74 cm /29 Inch.
Could somebody please let me know, it this is correct ?
Thank you in advance.
This message has an attachment image.
Please log in or register to see it.
Please Log in or Create an account to join the conversation.
- MarkT
- Online
- Site Supporter
- Posts: 13451
- Likes received: 9314
Replied by MarkT on topic DT400B (US import) - Handlebars
Service manuals have dimensions and drawings.Looks like levers are the widest part? But they don't hang off that much. 74-75 are the same width.
My guess is what you received are either not original or have been cut down...
.
My guess is what you received are either not original or have been cut down...
.
1963 YG1-T, 1965 MG1-T, Allstate 250, 1970 CT1b, 1971 R5, 1973 AT3MX, 1974 TS400L, 1975 RD350, 1976 DT175C, 1976 Husqvarna 250CR, 1981 DT175G, 1988 DT50, 1990 "Super" DT50, 1991 RT180, 2017 XT250
22 Aug 2021 07:11
#33
This message has an attachment image.
Please log in or register to see it.
Please Log in or Create an account to join the conversation.
- Wessi
- Offline
- Elite Member
- Posts: 171
- Likes received: 116
Replied by Wessi on topic DT400B (US import) - Handlebars
Thank you, Mark.
A bit disappointed, nobody could do a quick measurement on his DT
Anyway, the right width is 82cm.
I added 4 cm each side to get the right width, and brought it to re-chroming .
The shape of the middle section seems to be the same as the OEM.
A bit disappointed, nobody could do a quick measurement on his DT
Anyway, the right width is 82cm.
I added 4 cm each side to get the right width, and brought it to re-chroming .
The shape of the middle section seems to be the same as the OEM.
25 Aug 2021 03:00
#34
This message has an attachment image.
Please log in or register to see it.
Please Log in or Create an account to join the conversation.
Moderators: yamadmin, Makotosun, DEET, Vinnie, James Hart