facebook1 youtube1 twitter1 instagram linkedin1 pinterest1

NOTICE:  If you are not a free registered member of the site, you will not see the photos in the forum, and you won't be able to access our premium member content. Please consider joining our community! REGISTER AND MAKE THIS BOX DISAPPEAR!

×

Pictures Posting Not Working (12 Jun 2023)

Picture uploads is again unavailable. We are working on the problem. Thanks for your patience.

Makotosun

Not Quite a Newbie - CT3 175

  • Posts: 1278
  • Likes received: 587

Replied by AirborneSilva on topic Not Quite a Newbie - CT3 175

Pull the cylinder and remove the piston then pull up lightly on the rod, if there's any movement up and down then yep your big end bearing is gone. A little side to side is normal.
2023 Tenere T7
1976 DT400C
1975 DT400
1981 DT175H
1972 DT2 250
1980 GT80
1972 JT2
24 Mar 2023 01:53 #21

Please Log in or Create an account to join the conversation.

  • Posts: 198
  • Likes received: 69

Replied by Dennis D on topic Not Quite a Newbie - CT3 175

First thing I would do is pull the mag cover and turn the motor with the flywheel and see if it feels rough. If not, I would pull the clutch cover and access the kick idler gear and have a look at the roller bearing behind it and see if it is still intact.
The following user(s) Liked this Post: MarkT
25 Mar 2023 08:25 #22

Please Log in or Create an account to join the conversation.

Moderators: yamadmin, Makotosun, DEET, Vinnie, James Hart