×
Pictures Posting Not Working (12 Jun 2023)
Picture uploads is again unavailable. We are working on the problem. Thanks for your patience.
Makotosun
1973 Yamaha LT3 Kickstarter Shaft
- MarkT
- Offline
- Site Supporter
- Posts: 13392
- Likes received: 9258
Replied by MarkT on topic 1973 Yamaha LT3 Kickstarter Shaft
Perfect! Thank you!!
1963 YG1-T, 1965 MG1-T, Allstate 250, 1970 CT1b, 1971 R5, 1973 AT3MX, 1974 TS400L, 1975 RD350, 1976 DT175C, 1976 Husqvarna 250CR, 1981 DT175G, 1988 DT50, 1990 "Super" DT50, 1991 RT180, 2017 XT250
The following user(s) Liked this Post: littlemilo
12 Sep 2021 16:51
#11
Please Log in or Create an account to join the conversation.
- MarkT
- Offline
- Site Supporter
- Posts: 13392
- Likes received: 9258
Replied by MarkT on topic 1973 Yamaha LT3 Kickstarter Shaft
14mm on the AT/CT as well. So cover swap might work out great.
1963 YG1-T, 1965 MG1-T, Allstate 250, 1970 CT1b, 1971 R5, 1973 AT3MX, 1974 TS400L, 1975 RD350, 1976 DT175C, 1976 Husqvarna 250CR, 1981 DT175G, 1988 DT50, 1990 "Super" DT50, 1991 RT180, 2017 XT250
The following user(s) Liked this Post: JayB
12 Sep 2021 20:14
#12
Please Log in or Create an account to join the conversation.
- 69Attex
- Offline
- New Member
- Posts: 2
- Likes received: 0
Replied by 69Attex on topic 1973 Yamaha LT3 Kickstarter Shaft
Hello, first post here, I just picked up a 1973 LT3/100 (the purple one, 10/72 build date) from this post I gather the kickstart is a problem? I say this because my bike has a slight bind in the kickstart mechanism, the splines on the end are fine, but need to look at the internals. Will a 72 LT2 shaft work as a replacement? Thanks
13 Feb 2022 17:20
#13
Please Log in or Create an account to join the conversation.
- LETSJET
- Offline
- Elite Member
- Posts: 302
- Likes received: 359
Replied by LETSJET on topic 1973 Yamaha LT3 Kickstarter Shaft
Pretty sure they are the same LT2 LT3 HT1 HT1B. I did a LT2 starter shaft replacement, pretty simple. Keep the kick start lever very tight as the splines are smaller, less of them, and they are prone to stripping.
13 Feb 2022 17:56
#14
Please Log in or Create an account to join the conversation.
- 69Attex
- Offline
- New Member
- Posts: 2
- Likes received: 0
Replied by 69Attex on topic 1973 Yamaha LT3 Kickstarter Shaft
Thank you, I will tear into the side cover tomorrow, appreciate the reply
13 Feb 2022 18:01
#15
Please Log in or Create an account to join the conversation.
Moderators: yamadmin, Makotosun, DEET, Vinnie, James Hart