facebook1 youtube1 twitter1 instagram linkedin1 pinterest1

NOTICE:  If you are not a free registered member of the site, you will not see the photos in the forum, and you won't be able to access our premium member content. Please consider joining our community! REGISTER AND MAKE THIS BOX DISAPPEAR!

Found a part in carb, please help me ID!

  • msavitt
  • msavitt's Avatar Topic Author
  • Offline
  • Site Supporter
  • Site Supporter
  • Posts: 416
  • Likes received: 149
DT1E started on 2nd kick but I have a long punch list!

one issue is that bike runs on choke, dies from starvation when it's flipped off. 

supply to carb robust so this plus a full float bowl eliminates supply. 

took apart thinking I need to blow things out again, despite already making things really clean and found this little bit in bowl.  It's brass, cylindrical, no threads or screw head so maybe a passage plug? Measures 0.165" in length and 0.082" in diameter on one end and 0.065 in diameter on other end. Any ideas where is came from, what it does, where it goes massively appreciated!

  DT1E started on 2nd kick but I have a long punch list!

one issue is that bike runs on choke, dies from starvation when it's flipped off. 

supply to carb robust so this plus a full float bowl eliminates supply. 

took apart thinking I need to blow things out again, despite already making things really clean and found this little bit in bowl.  It's brass, cylindrical, no threads or screw head so maybe a passage plug? Measures 0.165" in length and 0.082" in diameter on one end and 0.065 in diameter on other end. Any ideas where is came from, what it does, where it goes massively appreciated!

 
12 Apr 2021 13:19 #1

This message has attachments images.
Please log in or register to see it.

Please Log in or Create an account to join the conversation.

  • Posts: 1174
  • Likes received: 762

Replied by 1971DT250 on topic Found a part in carb, please help me ID!

Looks like the locating pin from the carb body that keeps the slide properly oriented.
The hours spent riding my Enduros is not deducted from my life span.
12 Apr 2021 14:14 #2

Please Log in or Create an account to join the conversation.

  • Posts: 129
  • Likes received: 40

Replied by bart.ives on topic Found a part in carb, please help me ID!

Yes it could be the slide locating pin, but how would it ever end up in the float bowl?
Be Happy!
12 Apr 2021 14:28 #3

Please Log in or Create an account to join the conversation.

  • Posts: 2194
  • Likes received: 1263

Replied by Mothersbaugh on topic Found a part in carb, please help me ID!

If it runs with the choke on, but dies when you push the choke in (off), that indicates a lean condition. Need more gas to run equals larger pilot. Or another cleaning of the pilot and the idle circuits.
Last edit: 12 Apr 2021 16:14 by Mothersbaugh.
12 Apr 2021 14:38 #4

Please Log in or Create an account to join the conversation.

  • Posts: 1174
  • Likes received: 762

Replied by 1971DT250 on topic Found a part in carb, please help me ID!

The hours spent riding my Enduros is not deducted from my life span.
Last edit: 12 Apr 2021 14:58 by 1971DT250.
12 Apr 2021 14:56 #5

Please Log in or Create an account to join the conversation.

  • Posts: 129
  • Likes received: 40

Replied by bart.ives on topic Found a part in carb, please help me ID!

I believe the choke is a seperate delivery passage.   Here is a diagram.I believe the choke is a seperate delivery passage.   Here is a diagram.
Be Happy!
12 Apr 2021 14:59 #6

This message has an attachment image.
Please log in or register to see it.

Please Log in or Create an account to join the conversation.

  • msavitt
  • msavitt's Avatar Topic Author
  • Offline
  • Site Supporter
  • Site Supporter
  • Posts: 416
  • Likes received: 149

Replied by msavitt on topic Found a part in carb, please help me ID!

thank you all!
it was def in the bowl and not there when I put things together
I will take a closer look now, will figure out and report back
12 Apr 2021 15:05 #7

Please Log in or Create an account to join the conversation.

  • msavitt
  • msavitt's Avatar Topic Author
  • Offline
  • Site Supporter
  • Site Supporter
  • Posts: 416
  • Likes received: 149

Replied by msavitt on topic Found a part in carb, please help me ID!

I think I found it
Can someone tell me if they have a plug in this area of similar carb before I tap it in?
thank you 
  I think I found it
Can someone tell me if they have a plug in this area of similar carb before I tap it in?
thank you 
 
12 Apr 2021 15:13 #8

This message has attachments images.
Please log in or register to see it.

Please Log in or Create an account to join the conversation.

  • Posts: 129
  • Likes received: 40

Replied by bart.ives on topic Found a part in carb, please help me ID!

You might find your answer in one of these guides.
Be Happy!
12 Apr 2021 15:13 #9

This message has attachments files.
Please log in or register to see it.

Please Log in or Create an account to join the conversation.

  • Posts: 1174
  • Likes received: 762

Replied by 1971DT250 on topic Found a part in carb, please help me ID!

Here is one of mine. Looks like a brass pin is pressed in.

 
 
The hours spent riding my Enduros is not deducted from my life span.
Last edit: 12 Apr 2021 17:04 by 1971DT250.
12 Apr 2021 17:03 #10

This message has an attachment image.
Please log in or register to see it.

Please Log in or Create an account to join the conversation.

Moderators: yamadminEnduronutMakotosunDEETVinnieDevinJames Hart