×
Pictures Posting Not Working (12 Jun 2023)
Picture uploads is again unavailable. We are working on the problem. Thanks for your patience.
Makotosun
Parts id help needed please (again!)
- Gr8uncleal
- Topic Author
- Online
- Site Supporter
- Posts: 4061
- Likes received: 1992
Parts id help needed please (again!) was created by Gr8uncleal
I visited Santa's grotto the other day and came away with a box of goodies! Unfortunately some of them are unlabelled and I am struggling to identify them. Any pointers in the right direction would therefore be much appreciated - just things like which company used which wiring colours would be enough to get me started.
There are a few and so, where appropriate, I shall do an individual post for each one.
First up is a magneto base with a couple of coils and a set of points - no condenser though. Three wires coming off, all ending in individual bullet connectors, and colours are white, pink and black/white. Stamped with "Mitsuba"
I'm guessing small capacity 1970s single, but can't get passed that. Photos attached.
There are a few and so, where appropriate, I shall do an individual post for each one.
First up is a magneto base with a couple of coils and a set of points - no condenser though. Three wires coming off, all ending in individual bullet connectors, and colours are white, pink and black/white. Stamped with "Mitsuba"
I'm guessing small capacity 1970s single, but can't get passed that. Photos attached.
17 Dec 2019 04:03
#1
This message has attachments images.
Please log in or register to see it.
Please Log in or Create an account to join the conversation.
- Gr8uncleal
- Topic Author
- Online
- Site Supporter
- Posts: 4061
- Likes received: 1992
Replied by Gr8uncleal on topic Parts id help needed please (again!)
Second up is a stator(?) with three wires coming off it, all black/red and ending in a triangular block connector.
Stamped ND (Nippon Denso) on one side and 1KY on the other. Photos attached.
Short interlude for lunch now, but I shall return with more!!
Stamped ND (Nippon Denso) on one side and 1KY on the other. Photos attached.
Short interlude for lunch now, but I shall return with more!!
17 Dec 2019 04:11
#2
This message has attachments images.
Please log in or register to see it.
Please Log in or Create an account to join the conversation.
- Gr8uncleal
- Topic Author
- Online
- Site Supporter
- Posts: 4061
- Likes received: 1992
Replied by Gr8uncleal on topic Parts id help needed please (again!)
Right, back from lunch!
Third up is a broken magneto plate with what I think are two pulsers for cdi ignition attached. The pulsers are stamped TEC (I think!) Japan and the two wires coming off one of them are yellow and black and off the other blue and black/white.
The plate is stamped 4.11.24
Photos attached.
Third up is a broken magneto plate with what I think are two pulsers for cdi ignition attached. The pulsers are stamped TEC (I think!) Japan and the two wires coming off one of them are yellow and black and off the other blue and black/white.
The plate is stamped 4.11.24
Photos attached.
17 Dec 2019 05:21
#3
This message has attachments images.
Please log in or register to see it.
Please Log in or Create an account to join the conversation.
- Gr8uncleal
- Topic Author
- Online
- Site Supporter
- Posts: 4061
- Likes received: 1992
Replied by Gr8uncleal on topic Parts id help needed please (again!)
Fourth up is a selection of three items in one.
Can anyone give me some info on the manufacturer of the gear (23 tooth) - eg are they a specialist company.
I don't recognise the other round parts at all!
Photos attached.
Can anyone give me some info on the manufacturer of the gear (23 tooth) - eg are they a specialist company.
I don't recognise the other round parts at all!
Photos attached.
This message has attachments images.
Please log in or register to see it.
Please Log in or Create an account to join the conversation.
- Gr8uncleal
- Topic Author
- Online
- Site Supporter
- Posts: 4061
- Likes received: 1992
Replied by Gr8uncleal on topic Parts id help needed please (again!)
Fifth and last up is an electrical item of some sort.
Mitsubishi logo on it and the four wires are coloured black/white, black/yellow, black/red and red/black.
Photos attached.
Thanks again for any help that can be given.
Alan
Mitsubishi logo on it and the four wires are coloured black/white, black/yellow, black/red and red/black.
Photos attached.
Thanks again for any help that can be given.
Alan
17 Dec 2019 06:17
#5
This message has attachments images.
Please log in or register to see it.
Please Log in or Create an account to join the conversation.
Moderators: yamadmin, Makotosun, DEET, Vinnie, James Hart