facebook1 youtube1 twitter1 instagram linkedin1 pinterest1

NOTICE:  If you are not a free registered member of the site, you will not see the photos in the forum, and you won't be able to access our premium member content. Please consider joining our community! REGISTER AND MAKE THIS BOX DISAPPEAR!

×

Pictures Posting Not Working (12 Jun 2023)

Picture uploads is again unavailable. We are working on the problem. Thanks for your patience.

Makotosun

Clutch cable not connected at clutch pak

  • Huskyking
  • Huskyking's Avatar Topic Author
  • Offline
  • Senior Member
  • Senior Member
  • Posts: 42
  • Likes received: 16

Clutch cable not connected at clutch pak was created by Huskyking

I am currently going through 73-RT3, in my process of putting front end back together i am installing levers and clutch cable.
I have found that my cable has come completely lose at clutch pack. I can actually remove it out of the case.....
Is this common,and is it a easy proceedure to fix. thanks
10 Aug 2026 10:28 #1

Please Log in or Create an account to join the conversation.

  • Gr8uncleal
  • Gr8uncleal's Avatar
  • Away
  • Site Supporter
  • Site Supporter
  • Posts: 4928
  • Likes received: 2689

Replied by Gr8uncleal on topic Clutch cable not connected at clutch pak

Are you referring to this part?

214-16340-00
10 Aug 2026 10:33 #2

Please Log in or Create an account to join the conversation.

  • Huskyking
  • Huskyking's Avatar Topic Author
  • Offline
  • Senior Member
  • Senior Member
  • Posts: 42
  • Likes received: 16

Replied by Huskyking on topic Clutch cable not connected at clutch pak

not sure what that part is, my situation is that cable can be removed right out of case, it is no longer connected
10 Aug 2026 11:32 #3

Please Log in or Create an account to join the conversation.

  • Gr8uncleal
  • Gr8uncleal's Avatar
  • Away
  • Site Supporter
  • Site Supporter
  • Posts: 4928
  • Likes received: 2689

Replied by Gr8uncleal on topic Clutch cable not connected at clutch pak

Better take the cover off and have a look see!
The following user(s) Liked this Post: pabdt
10 Aug 2026 11:46 #4

Please Log in or Create an account to join the conversation.

  • Huskyking
  • Huskyking's Avatar Topic Author
  • Offline
  • Senior Member
  • Senior Member
  • Posts: 42
  • Likes received: 16

Replied by Huskyking on topic Clutch cable not connected at clutch pak

yes for sure, thx
10 Aug 2026 11:56 #5

Please Log in or Create an account to join the conversation.

  • Posts: 11082
  • Likes received: 4887

Replied by RT325 on topic Clutch cable not connected at clutch pak

Clutch pack is on the other side. That's your actuator in there. Just pull that cover & sit the cable back in place. Could give the fitting a squeeze to stop cable escaping while doing stuff up at the handlebars. All a learning curve but it'll all become clear when you pull the sprocket cover/actuator holder thingy. Enjoy your time on the site. Plenty of help here & welcome from nz.
10 Aug 2026 15:32 #6

Please Log in or Create an account to join the conversation.

Moderators: yamadmin, Makotosun, DEET, Vinnie, James Hart