facebook1 youtube1 twitter1 instagram linkedin1 pinterest1

NOTICE:  If you are not a free registered member of the site, you will not see the photos in the forum, and you won't be able to access our premium member content. Please consider joining our community! REGISTER AND MAKE THIS BOX DISAPPEAR!

×

Pictures Posting Not Working (12 Jun 2023)

Picture uploads is again unavailable. We are working on the problem. Thanks for your patience.

Makotosun

Kick Start Install

  • Bigredram
  • Bigredram's Avatar Topic Author
  • Offline
  • Junior Member
  • Junior Member
  • Posts: 17
  • Likes received: 9

Kick Start Install was created by Bigredram

As soon as the rest of my parts arrive I will put my CT3 crankcase cover back on.
When I pulled the cover off the kick starter ended up on my oil catch pan. The spring was not engaged so I am a little lost on how to reinstall and get tension on the return spring. Is there a step by step technical instruction sheet anyone can share?
Last edit: 05 Dec 2021 23:31 by Enduronut.
05 Dec 2021 19:47 #1

Please Log in or Create an account to join the conversation.

  • Posts: 484
  • Likes received: 313

Replied by adguy2112 on topic Kick Start Install

There are instructions in the forum search. I just  had to do it today myself. Darinm showed a trick with a screwdriver and the Kickstarter temporarily put back on the shaft (Kickstarter acts as an anchor so you can grab the spring with the tip of the screwdriver). It takes a little finessing But it’s a good technique to pre stretch the spring and get it ready to grab the actual anchor stud. I now hold the Kickstarter shaft in place when removing the clutch cover. Saves some time. 

www.yamaha-enduros.com/index.php/forums/...-not-returning#63107

here is that post. 
Last edit: 05 Dec 2021 23:29 by Enduronut.
05 Dec 2021 21:04 #2

Please Log in or Create an account to join the conversation.

Moderators: yamadmin, Makotosun, DEET, Vinnie, James Hart