facebook1 youtube1 twitter1 instagram linkedin1 pinterest1

NOTICE:  If you are not a free registered member of the site, you will not see the photos in the forum, and you won't be able to access our premium member content. Please consider joining our community! REGISTER AND MAKE THIS BOX DISAPPEAR!

×

Pictures Posting Not Working (12 Jun 2023)

Picture uploads is again unavailable. We are working on the problem. Thanks for your patience.

Makotosun

CT3 - TRANSMISSION PROBLEM

  • Gallotti
  • Gallotti's Avatar Topic Author
  • Offline
  • Senior Member
  • Senior Member
  • Posts: 32
  • Likes received: 9

CT3 - TRANSMISSION PROBLEM was created by Gallotti

Hey guys,
can anyone tell me how to avoid this problem? I had already shut the engine down convinced it was working and then realized something was wrong with the gear shift engagement.
I apologize for my English.
Thanks a lot for the help.

 
16 Oct 2021 03:02 #1

Please Log in or Create an account to join the conversation.

  • Posts: 14506
  • Likes received: 10720

Replied by MarkT on topic CT3 - TRANSMISSION PROBLEM

You are missing the washer and clip on the other side of the shift shaft.  Clip fits in groove in shift shaft next to seal. 

 


.

 
1963 YG1-T, 1965 MG1-T, Allstate 250, 1970 CT1b, 1971 R5, 1973 AT3MX, 1974 TS400L, 1975 RD350, 1976 DT175C, 1976 Husqvarna 250CR, 1981 DT175G, 1988 DT50, 1990 "Super" DT50, 1991 RT180, 2017 XT250
The following user(s) Liked this Post: Gr8uncleal, HouseofEnduro
16 Oct 2021 04:05 #2

This message has an attachment image.
Please log in or register to see it.

Please Log in or Create an account to join the conversation.

  • Gallotti
  • Gallotti's Avatar Topic Author
  • Offline
  • Senior Member
  • Senior Member
  • Posts: 32
  • Likes received: 9

Replied by Gallotti on topic CT3 - TRANSMISSION PROBLEM

I'm ashamed....I'm a complete idiot
16 Oct 2021 05:09 #3

Please Log in or Create an account to join the conversation.

  • Posts: 14506
  • Likes received: 10720

Replied by MarkT on topic CT3 - TRANSMISSION PROBLEM

You're fine.  If you knew half the mistakes I've made you'd feel like a genius! 

Also note that the transmission usually won't shift through all the gears unless you are spinning the shafts.
1963 YG1-T, 1965 MG1-T, Allstate 250, 1970 CT1b, 1971 R5, 1973 AT3MX, 1974 TS400L, 1975 RD350, 1976 DT175C, 1976 Husqvarna 250CR, 1981 DT175G, 1988 DT50, 1990 "Super" DT50, 1991 RT180, 2017 XT250
The following user(s) Liked this Post: RT325
16 Oct 2021 05:51 #4

Please Log in or Create an account to join the conversation.

Moderators: yamadmin, Makotosun, DEET, Vinnie, James Hart