facebook1 youtube1 twitter1 instagram linkedin1 pinterest1

NOTICE:  If you are not a free registered member of the site, you will not see the photos in the forum, and you won't be able to access our premium member content. Please consider joining our community! REGISTER AND MAKE THIS BOX DISAPPEAR!

×

Pictures Posting Not Working (12 Jun 2023)

Picture uploads is again unavailable. We are working on the problem. Thanks for your patience.

Makotosun

Yamaha at3 conversion to a magneto

  • Yamakazi
  • Yamakazi's Avatar Topic Author
  • Offline
  • Junior Member
  • Junior Member
  • Posts: 17
  • Likes received: 2

Yamaha at3 conversion to a magneto was created by Yamakazi

I want to convert my at3 to a magneto system could I use a dt100 mag or if I was lucky enough to find one an at1 
 
Last edit: 18 Sep 2021 18:45 by Yamakazi.
18 Sep 2021 18:44 #1

Please Log in or Create an account to join the conversation.

  • Posts: 14506
  • Likes received: 10720

Replied by MarkT on topic Yamaha at3 conversion to a magneto

Sorry, no.  Need to install crank and magneto from a CT1, CT2, or CT3.  But unless it's just a dirt bike then you'll have to do a lot of work on the wiring or get a CT harness.

Cheapest/easiest/best route is probably VAPE CDI kit.
1963 YG1-T, 1965 MG1-T, Allstate 250, 1970 CT1b, 1971 R5, 1973 AT3MX, 1974 TS400L, 1975 RD350, 1976 DT175C, 1976 Husqvarna 250CR, 1981 DT175G, 1988 DT50, 1990 "Super" DT50, 1991 RT180, 2017 XT250
18 Sep 2021 19:02 #2

Please Log in or Create an account to join the conversation.

  • Yamakazi
  • Yamakazi's Avatar Topic Author
  • Offline
  • Junior Member
  • Junior Member
  • Posts: 17
  • Likes received: 2

Replied by Yamakazi on topic Yamaha at3 conversion to a magneto

What system do you think would work best for me they have quite a few but nothing quite specific for my at
18 Sep 2021 20:11 #3

Please Log in or Create an account to join the conversation.

  • Posts: 14506
  • Likes received: 10720

Replied by MarkT on topic Yamaha at3 conversion to a magneto

DT125E
1963 YG1-T, 1965 MG1-T, Allstate 250, 1970 CT1b, 1971 R5, 1973 AT3MX, 1974 TS400L, 1975 RD350, 1976 DT175C, 1976 Husqvarna 250CR, 1981 DT175G, 1988 DT50, 1990 "Super" DT50, 1991 RT180, 2017 XT250
18 Sep 2021 20:21 #4

Please Log in or Create an account to join the conversation.

  • Posts: 14506
  • Likes received: 10720

Replied by MarkT on topic Yamaha at3 conversion to a magneto

Here's the old Powerdynamo page www.powerdynamo.biz/eng/systems/7729/7729main.htm
1963 YG1-T, 1965 MG1-T, Allstate 250, 1970 CT1b, 1971 R5, 1973 AT3MX, 1974 TS400L, 1975 RD350, 1976 DT175C, 1976 Husqvarna 250CR, 1981 DT175G, 1988 DT50, 1990 "Super" DT50, 1991 RT180, 2017 XT250
18 Sep 2021 20:27 #5

Please Log in or Create an account to join the conversation.

Moderators: yamadmin, Makotosun, DEET, Vinnie, James Hart