facebook1 youtube1 twitter1 instagram linkedin1 pinterest1

NOTICE:  If you are not a free registered member of the site, you will not see the photos in the forum, and you won't be able to access our premium member content. Please consider joining our community! REGISTER AND MAKE THIS BOX DISAPPEAR!

×

Pictures Posting Not Working (12 Jun 2023)

Picture uploads is again unavailable. We are working on the problem. Thanks for your patience.

Makotosun

RT3 Front fender

  • Posts: 5
  • Likes received: 1

Replied by Sniper X on topic RT3 Front fender

Yep, the RT3 front fender and wheel tire were 21in, all others that I know of were all for 18in front wheels and tires. Plys anything off of a At1 thru CT1 were smaller front forks. Only the DT1 and DT250 were the same size forks but the fenders for the 250s were also for 18 front wheels and had totally different mounts. 
06 Apr 2026 22:37 #11

Please Log in or Create an account to join the conversation.

  • Gr8uncleal
  • Gr8uncleal's Avatar
  • Away
  • Site Supporter
  • Site Supporter
  • Posts: 4858
  • Likes received: 2651

Replied by Gr8uncleal on topic RT3 Front fender

Just a fyi, and that is the 1974 European DT250/DT360A used the same lower front mudguard/fender as fitted to the DT/RT 2 & 3 from 1972/3, not the higher one as fitted to the US models.  
The following user(s) Liked this Post: pabdt
07 Apr 2026 00:26 #12

Please Log in or Create an account to join the conversation.

  • Posts: 14808
  • Likes received: 11112

Replied by MarkT on topic RT3 Front fender

Good point Alan.  And you are correct AFAIK, no fender size difference between 72-74 175, 250, and 360 models with the factory low steel fender.  

 
1963 YG1-T, 1965 MG1-T, Allstate 250, 1970 CT1b, 1971 R5, 1973 AT3MX, 1974 TS400L, 1975 RD350, 1976 DT175C, 1976 Husqvarna 250CR, 1981 DT175G, 1988 DT50, 1990 "Super" DT50, 1991 RT180, 2017 XT250
07 Apr 2026 06:14 #13

Please Log in or Create an account to join the conversation.

Moderators: yamadmin, Makotosun, DEET, Vinnie, James Hart