facebook1 youtube1 twitter1 instagram linkedin1 pinterest1

NOTICE:  If you are not a free registered member of the site, you will not see the photos in the forum, and you won't be able to access our premium member content. Please consider joining our community! REGISTER AND MAKE THIS BOX DISAPPEAR!

×

Pictures Posting Not Working (12 Jun 2023)

Picture uploads is again unavailable. We are working on the problem. Thanks for your patience.

Makotosun

RT3 32mm carb on DT1B

  • thumperstew
  • thumperstew's Avatar Topic Author
  • Offline
  • Junior Member
  • Junior Member
  • Posts: 23
  • Likes received: 3

RT3 32mm carb on DT1B was created by thumperstew

Ok, scrapping my RT3 project due engine lower end issues.  Installed the RT 32mm Mikuni on my 69 DT1B, started easily, revs nicely. Just got the RT1 carb spacer, 275-13555-00.  Want to enlarge carb-intake port on cylinder for less restriction. Not planning any other major porting. Hoping to find a Bassani or early aftermarket pipe for reasonable $$.  The DT1B will be a play bike, not a resto.  Have some aluminum wheels and other mild upgrade parts.
Any thoughts or suggestions?
BTW, the old RT3 modified frame is free to the first person who picks it up.  No Shipping, located in N. California. Pictures available if you are serious.
 
24 Jun 2025 07:49 #1

Please Log in or Create an account to join the conversation.

Moderators: yamadmin, Makotosun, DEET, Vinnie, James Hart