facebook1 youtube1 twitter1 instagram linkedin1 pinterest1

NOTICE:  If you are not a free registered member of the site, you will not see the photos in the forum, and you won't be able to access our premium member content. Please consider joining our community! REGISTER AND MAKE THIS BOX DISAPPEAR!

×

Pictures Posting Not Working (12 Jun 2023)

Picture uploads is again unavailable. We are working on the problem. Thanks for your patience.

Makotosun

How do I pull my stator? 1968 yg5

  • Mothra
  • Mothra's Avatar Topic Author
  • Offline
  • New Member
  • New Member
  • Posts: 1
  • Likes received: 0

How do I pull my stator? 1968 yg5 was created by Mothra

So I'm trying to pull my motor apart and cant get the stator to come off. I read that I can thread a bolt into the center and tap that with a hammer or use a steering wheel puller.

What's the best way to do this? 
16 Aug 2022 19:49 #1

This message has an attachment image.
Please log in or register to see it.

Please Log in or Create an account to join the conversation.

  • Posts: 10828
  • Likes received: 4695

Replied by RT325 on topic How do I pull my stator? 1968 yg5

Hope this link works from one MarkT put up once. Don't whatever you do go using something with jaws pulling in the back. Link didn't come up but put number in ebay shows it.

ebay 381789688313
The following user(s) Liked this Post: Ht1kid
Last edit: 16 Aug 2022 20:00 by RT325.
16 Aug 2022 19:58 #2

Please Log in or Create an account to join the conversation.

  • Posts: 1602
  • Likes received: 957

Replied by Ht1kid on topic How do I pull my stator? 1968 yg5

RT325 is correct I have that puller it works on my AT2 
16 Aug 2022 20:30 #3

Please Log in or Create an account to join the conversation.

  • Posts: 14506
  • Likes received: 10720

Replied by MarkT on topic How do I pull my stator? 1968 yg5

Puller on ebay

 
1963 YG1-T, 1965 MG1-T, Allstate 250, 1970 CT1b, 1971 R5, 1973 AT3MX, 1974 TS400L, 1975 RD350, 1976 DT175C, 1976 Husqvarna 250CR, 1981 DT175G, 1988 DT50, 1990 "Super" DT50, 1991 RT180, 2017 XT250
The following user(s) Liked this Post: RT325, Ht1kid
16 Aug 2022 21:03 #4

Please Log in or Create an account to join the conversation.

  • Posts: 14506
  • Likes received: 10720

Replied by MarkT on topic How do I pull my stator? 1968 yg5

Or if you have 10mm x 1.25 pitch bolt with enough threads that it will tighten down on end of crank before it runs out of threads... tighten it into end of rotor and it will pop rotor off. 

Don't use hammer or steering wheel puller. 
1963 YG1-T, 1965 MG1-T, Allstate 250, 1970 CT1b, 1971 R5, 1973 AT3MX, 1974 TS400L, 1975 RD350, 1976 DT175C, 1976 Husqvarna 250CR, 1981 DT175G, 1988 DT50, 1990 "Super" DT50, 1991 RT180, 2017 XT250
The following user(s) Liked this Post: Ht1kid
16 Aug 2022 21:07 #5

Please Log in or Create an account to join the conversation.

Moderators: yamadmin, Makotosun, DEET, Vinnie, James Hart