facebook1 youtube1 twitter1 instagram linkedin1 pinterest1

NOTICE:  If you are not a free registered member of the site, you will not see the photos in the forum, and you won't be able to access our premium member content. Please consider joining our community! REGISTER AND MAKE THIS BOX DISAPPEAR!

×

Pictures Posting Not Working (12 Jun 2023)

Picture uploads is again unavailable. We are working on the problem. Thanks for your patience.

Makotosun

Crosspost: CT2 Top end with new VM26 carb

  • Billy Mild
  • Billy Mild's Avatar Topic Author
  • Offline
  • Elite Member
  • Elite Member
  • Posts: 162
  • Likes received: 24

Replied by Billy Mild on topic Crosspost: CT2 Top end with new VM26 carb

So far this setup appears to run pretty good. I might need a bigger main jet. 

This thing rips right off idle. I'm running a 25 pilot jet, 190 main jet, and kept the slide and needle the carb came with. 

27.5 pilot jet was too much I had to have the airscrew too far out. 

I don't know if it has ever had the ability to power wheelie in first gear like it does now. I will document the parts I used to do this so everyone can have it for future reference. I need to do plug chops to ensure it is all good. 
The following user(s) Liked this Post: JayB, AirborneSilva, Sneezles61, tee_cee
29 Jul 2022 20:03 #11

Please Log in or Create an account to join the conversation.

Moderators: yamadminMakotosunDEETVinnieJames Hart