facebook1 youtube1 twitter1 instagram linkedin1 pinterest1

NOTICE:  If you are not a free registered member of the site, you will not see the photos in the forum, and you won't be able to access our premium member content. Please consider joining our community! REGISTER AND MAKE THIS BOX DISAPPEAR!

×

Pictures Posting Not Working (12 Jun 2023)

Picture uploads is again unavailable. We are working on the problem. Thanks for your patience.

Makotosun

Speedo and tach compatibility

  • msavitt
  • msavitt's Avatar Topic Author
  • Offline
  • Site Supporter
  • Site Supporter
  • Posts: 1262
  • Likes received: 675

Speedo and tach compatibility was created by msavitt

I have a DT1E and am considering some 72 or 73 units in better condition. Partzilla says part numbers are different but mounting stuff looks very similar perhaps same. 

does anyone know if units from 72 or 73 will work - as in correct ratios from wheel and engine - on a 71?

as always thank you. 
03 Apr 2021 10:19 #1

Please Log in or Create an account to join the conversation.

  • Posts: 14506
  • Likes received: 10720

Replied by MarkT on topic Speedo and tach compatibility

Yamaha meters are the same in terms of internal calibration so they can be interchanged in that respect. 

Drive ratio is adjusted at the drive end (drive gears in wheel or tach drive gears in engine).

Mounting can be different.  I'm not familiar enough with those models to know for sure if mounts are the same.
1963 YG1-T, 1965 MG1-T, Allstate 250, 1970 CT1b, 1971 R5, 1973 AT3MX, 1974 TS400L, 1975 RD350, 1976 DT175C, 1976 Husqvarna 250CR, 1981 DT175G, 1988 DT50, 1990 "Super" DT50, 1991 RT180, 2017 XT250
The following user(s) Liked this Post: none_of_my_bikes_run
03 Apr 2021 10:54 #2

Please Log in or Create an account to join the conversation.

  • Posts: 1405
  • Likes received: 1326

Replied by DEET on topic Speedo and tach compatibility

68-73 mount the same.
This email address is being protected from spambots. You need JavaScript enabled to view it.

Where the Yamaha Enduro is still a current model...
03 Apr 2021 11:49 #3

Please Log in or Create an account to join the conversation.

  • msavitt
  • msavitt's Avatar Topic Author
  • Offline
  • Site Supporter
  • Site Supporter
  • Posts: 1262
  • Likes received: 675

Replied by msavitt on topic Speedo and tach compatibility

thank you
swam laps at the pool today, ride there on my DT360, it sounds so good!
03 Apr 2021 16:35 #4

Please Log in or Create an account to join the conversation.

Moderators: yamadmin, Makotosun, DEET, Vinnie, James Hart