×
Pictures Posting Not Working (12 Jun 2023)
Picture uploads is again unavailable. We are working on the problem. Thanks for your patience.
Makotosun
DT1 keyswitch part variations
- adguy2112
- Topic Author
- Offline
- Site Supporter
- Posts: 472
- Likes received: 304
DT1 keyswitch part variations was created by adguy2112
Hi All, I've seen key switches listing both 233-82508 and 214-82508 for a DT1C and partzilla shows the former number at the top of the list but I'm fairly sure the 214 version is what I have. The 233 version seems more widely available and less expensive where I've seen them available. Service manual seems to point to the 214
233 - 4 single wires (red, white, blue, black) 7 wires into the box connector (green, green/red, brown, black/white, yellow, blue/white)
214 - 2 single wires (red, white), 5 wires into the box connector (yellow, green, black, blue, brown)
Anyone here come across this and know if either could be used?
233 - 4 single wires (red, white, blue, black) 7 wires into the box connector (green, green/red, brown, black/white, yellow, blue/white)
214 - 2 single wires (red, white), 5 wires into the box connector (yellow, green, black, blue, brown)
Anyone here come across this and know if either could be used?
13 May 2022 13:30
#1
Please Log in or Create an account to join the conversation.
- Swoop56
- Offline
- Site Supporter
- Posts: 1118
- Likes received: 692
Replied by Swoop56 on topic DT1 keyswitch part variations
My DT1 C parts supplement shows the 233 prefix switch being used .
13 May 2022 14:34
#2
Please Log in or Create an account to join the conversation.
- Swoop56
- Offline
- Site Supporter
- Posts: 1118
- Likes received: 692
Replied by Swoop56 on topic DT1 keyswitch part variations
It might pay to check the part number on your wiring loom .
There is a label on it under the fuel tank . The number is
233-82590-21.
There is a label on it under the fuel tank . The number is
233-82590-21.
13 May 2022 14:43
#3
Please Log in or Create an account to join the conversation.
- Badger52
- Offline
- Site Supporter
- Posts: 115
- Likes received: 117
Replied by Badger52 on topic DT1 keyswitch part variations
yamaha-enduros.com/index.php/forums/fng-...iring-harness#112010
‘
This article has some info I learned when buying a DT1-C switch a few years ago. I ordered the wrong one, and Speed and Sport said I wasn't the first. They promptly sent the correct one which had more wires.
Good luck sorting it out.
‘
This article has some info I learned when buying a DT1-C switch a few years ago. I ordered the wrong one, and Speed and Sport said I wasn't the first. They promptly sent the correct one which had more wires.
Good luck sorting it out.
288501A
Please Log in or Create an account to join the conversation.
Moderators: yamadmin, Makotosun, DEET, Vinnie, James Hart