×
Pictures Posting Not Working (12 Jun 2023)
Picture uploads is again unavailable. We are working on the problem. Thanks for your patience.
Makotosun
DT 360 Speedometer worm gear
- ldw72120
- Topic Author
- Offline
- Site Supporter
- Posts: 99
- Likes received: 27
DT 360 Speedometer worm gear was created by ldw72120
Does the bushing above the speedometer worm gear, part number 109-25136-00-00, screw out? It has 4 slots in the top but I have been unable to turn it in either direction. I have removed the keeper above the bushing. Thanks for any suggestions.
20 Jul 2018 12:05
#1
Please Log in or Create an account to join the conversation.
- Mothersbaugh
- Offline
- Platinum Member
- Posts: 1659
- Likes received: 1053
Replied by Mothersbaugh on topic DT 360 Speedometer worm gear
Menard's had a Father's Day sale on Dremel 200's. 50% off, plus the 11% rebate. I bought one, and a few bits as well, and I studied carefully how not to have it jump out of my hands and kill me. I geared up. Before you laugh, let me say that this is my get up to ride a bicycle 20-40 miles, and I did not want to change the goggle strap; easier just to slap on the helmet. And it did come in handy; I banged my head into the corner of an open cabinet. But I digress.
I made a DEET speedometer tool. (I was going to shorten that to 'speedo tool,' but somehow that brought back bad memories of Will Ferrell and Cheri O'Terri as cheerleaders, so I spelled it out completely.) It's crude and needs some fine file work to make it presentable, but for a first experience with a Dremel, I was pleased...because...it did the job.
Looks like DEET saved me dollars...again. Thanks, teach!!
I made a DEET speedometer tool. (I was going to shorten that to 'speedo tool,' but somehow that brought back bad memories of Will Ferrell and Cheri O'Terri as cheerleaders, so I spelled it out completely.) It's crude and needs some fine file work to make it presentable, but for a first experience with a Dremel, I was pleased...because...it did the job.
Looks like DEET saved me dollars...again. Thanks, teach!!
The following user(s) Liked this Post: DEET, Rick C., MarkT
17 Jun 2019 07:16
#2
This message has attachments images.
Please log in or register to see it.
Please Log in or Create an account to join the conversation.
- DEET
- Offline
- Moderator
- Posts: 1403
- Likes received: 1279
Replied by DEET on topic DT 360 Speedometer worm gear
Awesome!
"... has the ability to fashion tools and use them."
"... has the ability to fashion tools and use them."
This email address is being protected from spambots. You need JavaScript enabled to view it.
Where the Yamaha Enduro is still a current model...
Where the Yamaha Enduro is still a current model...
The following user(s) Liked this Post: Snglsmkr
17 Jun 2019 09:12
#3
Please Log in or Create an account to join the conversation.
- run103
- Offline
- Site Supporter
- Posts: 507
- Likes received: 210
Replied by run103 on topic DT 360 Speedometer worm gear
If you are patient I did it this way. Remove the rubber seal and then spray penetrating oil on the spiral gear and the follower and then heat it. I also ground a robertson hex screwdriver bit to fit where the cable inserts. I then heated and lightly twisted on it for 3 or 4 days and heated it and it loosened up and came apart without having to resort to a hammer
Doug
Doug
06 Aug 2020 12:31
#4
Please Log in or Create an account to join the conversation.
Moderators: yamadmin, Makotosun, DEET, Vinnie, James Hart