facebook1 youtube1 twitter1 instagram linkedin1 pinterest1

NOTICE:  If you are not a free registered member of the site, you will not see the photos in the forum, and you won't be able to access our premium member content. Please consider joining our community! REGISTER AND MAKE THIS BOX DISAPPEAR!

×

Pictures Posting Not Working (12 Jun 2023)

Picture uploads is again unavailable. We are working on the problem. Thanks for your patience.

Makotosun

Kill switch ?

  • ZEFER
  • ZEFER's Avatar Topic Author
  • Offline
  • Site Supporter
  • Site Supporter
  • Posts: 15
  • Likes received: 12

Kill switch ? was created by ZEFER

I’ve been fooling with a 74 DT 250-A
basicly  just cleaning 40 plus years of baked on dirt..oil …dirt with oil..the bike is-was a 2 nd kick machine before it got cleaned..nothing was disturbed or modified.. I did install a new front brake light switch.So I was in the headlight to plug new switch. I had the throttle and right side switch housing..so I took it apart and found it not connected to anything. It is a black wire with a white trace. It now is just hanging not hooked up…the kill switch grounds the coil ? So I should have spark without it being hooked up ? I 
29 Dec 2025 12:10 #1

Please Log in or Create an account to join the conversation.

  • Posts: 1212
  • Likes received: 792

Replied by Swoop56 on topic Kill switch ?

No . The kill switch only grounds the coil when activated .
With it's wiring disconnected , everything will work normally ,
but obviously it won't be killing anything if operated .
29 Dec 2025 12:16 #2

Please Log in or Create an account to join the conversation.

Moderators: yamadmin, Makotosun, DEET, Vinnie, James Hart