Good evening everybody! Is anybody out there who can please give me the measures for the rubber under the fuel tank which has part no. 363-24183-00? I want to print it with my 3D printer Thx!

That's a lot of measurements, Gerry, as well as the odd angle and radius.

width and thickness will be enough. The rest I can take from frame... radius depends on the radius from tank.

OK.

If the US chaps don't chip in overnight (UK time), I'll have a look at mine in the morning.

What if you laced a large ziplock bag over the frame, then fill it with that wall foam filler while the tank was on?
That might create the inner, outer structure and correct width.

Meanwhile, let me go look for mine...though gr8uncleal will probably be faster.

I can see why you wanna make your own!

Is this a misprint?   www.cmsnl.com/yamaha-sc500-1973-usa_mode...locating_3632418300/

$18

Just so happens my dt250a is laying on my seat!

cliff

I think that for discontinued items, if a database can access an automated price at all, it will be the last one quoted, so could be decades old. Very occasionally, I have been lucky enough to buy discontinued new old stock from a dealer for the last automated price. 

Gerry, I'll need to move a couple of bikes to get to my DT360A in order to measure for you, so please bear with me.

Mark up for details needed.

ooops
imager is on the blink againMark up for details needed.

ooops
imager is on the blink again 

31.0 thick
65.5 wide at split
62 wide at start of top radius
115 tall major axis
103 tall minor axis

imgur.com/ZbTjX4u
Mark up for details needed.

imgur.com/a/oJLRudW

<blockquote class="imgur-embed-pub" lang="en" data-id="a/NSKNSRt" data-context="false" ><a href="//imgur.com/a/NSKNSRt"></a></blockquote><script async src="//s.imgur.com/min/embed.js" charset="utf-8"></script>