facebook1 youtube1 twitter1 instagram linkedin1 pinterest1

NOTICE:  If you are not a free registered member of the site, you will not see the photos in the forum, and you won't be able to access our premium member content. Please consider joining our community! REGISTER AND MAKE THIS BOX DISAPPEAR!

×

Pictures Posting Not Working (12 Jun 2023)

Picture uploads is again unavailable. We are working on the problem. Thanks for your patience.

Makotosun

Searching for the correct rubber bearing

  • Gerryz
  • Gerryz's Avatar Topic Author
  • Offline
  • Premium Member
  • Premium Member
  • Posts: 70
  • Likes received: 11

Replied by Gerryz on topic Searching for the correct rubber bearing

Sizes are the same (diameter 23 mm, length 23/25 mm) but one with 8 mm bolt and one with 10 mm bolt. I will check the sources, thanks for your help!

P.S.: is uploading from fotos still out of order?
The following user(s) Liked this Post: RT325
28 Aug 2024 00:26 #11

Please Log in or Create an account to join the conversation.

  • Gr8uncleal
  • Gr8uncleal's Avatar
  • Away
  • Site Supporter
  • Site Supporter
  • Posts: 4251
  • Likes received: 2142

Replied by Gr8uncleal on topic Searching for the correct rubber bearing

Photos need to be uploaded via a third party host such as Imgur.
28 Aug 2024 00:31 #12

Please Log in or Create an account to join the conversation.

  • Posts: 10
  • Likes received: 5

Replied by Moto36 on topic Searching for the correct rubber bearing

Try ebay for universal shock absorber bushes,I have used them for many things in the past.
The following user(s) Liked this Post: Ht1kid
28 Aug 2024 02:11 #13

Please Log in or Create an account to join the conversation.

  • Gerryz
  • Gerryz's Avatar Topic Author
  • Offline
  • Premium Member
  • Premium Member
  • Posts: 70
  • Likes received: 11

Replied by Gerryz on topic Searching for the correct rubber bearing

Found one which is 10 mm longer and will cut it on my lathe.
The following user(s) Liked this Post: RT325
28 Aug 2024 03:33 #14

Please Log in or Create an account to join the conversation.

  • Posts: 10237
  • Likes received: 4243

Replied by RT325 on topic Searching for the correct rubber bearing

Be sure to leave the center bit at length to fit & the stay bar & shorten the outer a bit more.
Sorry i'm sure you know what ya doing. Shut up 'Me'.
28 Aug 2024 04:38 #15

Please Log in or Create an account to join the conversation.

  • Gerryz
  • Gerryz's Avatar Topic Author
  • Offline
  • Premium Member
  • Premium Member
  • Posts: 70
  • Likes received: 11

Replied by Gerryz on topic Searching for the correct rubber bearing

I have the original measures ;) Thx!
The following user(s) Liked this Post: RT325
28 Aug 2024 04:47 #16

Please Log in or Create an account to join the conversation.

Moderators: yamadmin, Makotosun, DEET, Vinnie, James Hart