facebook1 youtube1 twitter1 instagram linkedin1 pinterest1

NOTICE:  If you are not a free registered member of the site, you will not see the photos in the forum, and you won't be able to access our premium member content. Please consider joining our community! REGISTER AND MAKE THIS BOX DISAPPEAR!

×

Pictures Posting Not Working (12 Jun 2023)

Picture uploads is again unavailable. We are working on the problem. Thanks for your patience.

Makotosun

74 DT125 to 175 air box

  • srsnow
  • srsnow's Avatar Topic Author
  • Offline
  • Senior Member
  • Senior Member
  • Posts: 43
  • Likes received: 10

Replied by srsnow on topic 74 DT125 to 175 air box

I tried mocking it up and that is when i noticed the fins were hitting some stuff the 125 cylinder didn't, but I never tried bolting it down and installing the carb. If the carb pad is in the same location it maybe ok, I just didn't get that far when I had it apart.

Ae you able to tell what year it is from those numbers? I looked over it again I noticed there is a spot for the oil injection at the base of the cylinder but it is not drilled and tapped which makes me wonder if it is from a different year that 74/75 or maybe a different model that didn't have oil injection. I can't find my Clymer manual that has the port heights to try and check where these are
10 Jan 2023 09:08 #11

Please Log in or Create an account to join the conversation.

  • Posts: 14515
  • Likes received: 10726

Replied by MarkT on topic 74 DT125 to 175 air box

If cylinder isn't tapped for oil injection it's a 1976 DT175C
1963 YG1-T, 1965 MG1-T, Allstate 250, 1970 CT1b, 1971 R5, 1973 AT3MX, 1974 TS400L, 1975 RD350, 1976 DT175C, 1976 Husqvarna 250CR, 1981 DT175G, 1988 DT50, 1990 "Super" DT50, 1991 RT180, 2017 XT250
10 Jan 2023 10:28 #12

Please Log in or Create an account to join the conversation.

Moderators: yamadmin, Makotosun, DEET, Vinnie, James Hart