I am piecing my DT back together and am being punished for not taking enough pictures during disassembly.  The manuals show the general location of the horn but not actually how/where it is attached to the frame.

Can someone with a 360 shoot me a picture of the mounting location and hardware on their bike so I can move past this silly hurdle?

I'll post a couple of (poor quality!) photos of mine later, but it mounts into the two holes on top of the lower fork yoke (triple tree). The attached parts diagram shows the holes, and the photo of the horn has the angled bracket that is used.

Edit - photos now attached. The first one is taken from the front, the second one from more at the side. The bike is stored between the wife's golf clubs, my dad's lawnmower and my RD125, so access was very limited!   

The dodgy item at the front is a 6v voltage regulator that I'm hoping still works! 

yamaha-dt360-1974-usa-steering_bigyau1065d-8_4e91.gif (1075×1500) (cmsnl.com)

HORN for DT360 1974 USA - order at CMSNL

   

Thank you that is helpful!  I'll see if I can get it out back on tonight