Hello everyone, I have a 1974 Enduro 360 that needs a good going through.  My mechanic wanted me to source the following things.  Complete gasket and seal set for the engine and gear case, oil injection pump seals, fork seals and a set of rings.  I did do a search and see there is some disagreement on vendors being reliable and accurate.  Where do you recommend I get these parts from?  Thanks for the help.

For my 75 DT175 I found almost everything I needed at Rocky Mountain and Speed & Sport. Both good places.

from the UK Ronin47.

It sounds like you have a DT360A, but check your VIN and engine number against those in the VIN tables in the Tech Library here (see top tool bar) just to be sure.

The numbers of the parts that you require can be found on sites such as Partzilla and CMSNL. There might be a parts manual in the Tech Library, but I'm not sure that it is complete.

Some parts might still be available from Yamaha, some discontinued parts are on fleabay, plus the companies that JimA gave.

Don't fit brassware from carb kits, do change the rubber 'O' ring in the carb (still available from Yamaha) and do change the front and rear brake shoes (again, still available from Yamaha).

Enduronut who is a member here might be able to hook you up with crankshaft seals and possibly gaskets and piston and ring sets if needed.

he might have other useful parts besides these for a DT360A, just ask him.

kdirepros.com
speedandsportinc
partzilla
enduring cycles on ebay for oem style fasteners
motorcycleid.com for aftermarket switches
vintageconnections.com for electrical connectors
ebay sellers for out of production stuff body parts etc
MikesXS for some reflectors

Just a few...


 

store.speedandsportinc.com/ - looks to have everything you need, but some parts prices may give you sticker shock. The site shows the part numbers you can search with.
vintagedirtandtrail.com/ - has some of the parts with good pricing. I have made numerous orders with them and they are good to deal with. After some order I received a 20% off code with the parts.
www.rockymountainatvmc.com/oem-parts/Yamaha - my favorite place to buy nos oem when they have it. Fast shipping too.
Clauss Studios - www.ebay.com/sch/i.html?_ssn=djia&store_...SM-Restoration-Parts - good source for rubber parts, like air intake boot and tank mounts. I have purchased from them with no issues.

Joe at Vintage Dirt and Trail is a totally good person and nearly my next door neighbor and awesome to deal with. 

wanted DT 360 air cleaner and boot seat pan front turn signal mounts

Check out Clauss Studios - link below.

KDI (see banner/link on the right of all pages on this forum) should have the seat.

Reproduction Molded Rubber for classic motorcycles - Search Results (claussstudios.com)

I have the turn signal mounts.

email....  This email address is being protected from spambots. You need JavaScript enabled to view it.