×
Pictures Posting Not Working (12 Jun 2023)
Picture uploads is again unavailable. We are working on the problem. Thanks for your patience.
Makotosun
1975 DT400B (USA model) decompression valve 'O' ring - UK
- Jammyyammy
- Topic Author
- Offline
- Elite Member
- Posts: 279
- Likes received: 58
1975 DT400B (USA model) decompression valve 'O' ring - UK was created by Jammyyammy
Hi - does anyone know the exact size of the 'o' ring for a 1975 DT400B (USA model) decompression valve. There doesn't seem to be any OEM available in the UK (93210-05215-00) and it sems ridiculous to ship one from the states, cost and time..., when, if I know the dimensions, I could get one from ebay for next to nothing in a day or so. I could measure up the old one and the valve etc etc and best guess / fudge something, but if anyone knows the correct dimensions (inner diameter and cross section), then that would be much better............ Thanking you in advance..............
20 Mar 2021 04:00
#1
Please Log in or Create an account to join the conversation.
- Swoop56
- Offline
- Site Supporter
- Posts: 1118
- Likes received: 692
Replied by Swoop56 on topic 1975 DT400B (USA model) decompression valve 'O' ring - UK
My parts book gives dimensions of 3.5-5.2 .
I would presume it would need to be of Viton material
owing to heat issues .
Hope that helps .
I would presume it would need to be of Viton material
owing to heat issues .
Hope that helps .
The following user(s) Liked this Post: Jammyyammy
20 Mar 2021 04:12
#2
Please Log in or Create an account to join the conversation.
- Gr8uncleal
- Offline
- Site Supporter
- Posts: 3972
- Likes received: 1911
Replied by Gr8uncleal on topic 1975 DT400B (USA model) decompression valve 'O' ring - UK
+1
Always a chance that it is still available from Yamaha.
Always a chance that it is still available from Yamaha.
20 Mar 2021 04:45
#3
Please Log in or Create an account to join the conversation.
- Mothersbaugh
- Offline
- Platinum Member
- Posts: 1659
- Likes received: 1053
Replied by Mothersbaugh on topic 1975 DT400B (USA model) decompression valve 'O' ring - UK
In another thread, someone posted this as being available from Harbor Freight. Must be something like it in your area?
20 Mar 2021 07:53
#4
This message has an attachment image.
Please log in or register to see it.
Please Log in or Create an account to join the conversation.
- Biggles
- Offline
- Junior Member
- Posts: 17
- Likes received: 5
Replied by Biggles on topic 1975 DT400B (USA model) decompression valve 'O' ring - UK
Hi Jammy, did you get anywhere with the o ring issue? I agree with the other guys ref the parts book, but can't see how 3.5 is supposed to fit as a gauge....I tried a 5mm x 2mm but it was too fat. The 4x1 that I had did fit but I think the correct diameter is 5 (or 5.2). Or, is it a wierd oblong shape that is 3.5 long? The slot it goes in may suggest just that. Dunno. There is an o ring place near me that can make up some, if only we know what to make!
20 Apr 2021 12:19
#5
Please Log in or Create an account to join the conversation.
- MarkT
- Offline
- Site Supporter
- Posts: 13392
- Likes received: 9258
Replied by MarkT on topic 1975 DT400B (USA model) decompression valve 'O' ring - UK
You guys might check with DEET and see if he has some.
1963 YG1-T, 1965 MG1-T, Allstate 250, 1970 CT1b, 1971 R5, 1973 AT3MX, 1974 TS400L, 1975 RD350, 1976 DT175C, 1976 Husqvarna 250CR, 1981 DT175G, 1988 DT50, 1990 "Super" DT50, 1991 RT180, 2017 XT250
20 Apr 2021 15:07
#6
Please Log in or Create an account to join the conversation.
- DEET
- Offline
- Moderator
- Posts: 1403
- Likes received: 1279
Replied by DEET on topic 1975 DT400B (USA model) decompression valve 'O' ring - UK
I have both the small and large decompression o-ring. $3.80 ($6 on eBay)
They will mail in a letter envelope.
1 ounce postage to the UK is $1.20
You could put a lot of them in an envelope and not exceed 1 ounce
They will mail in a letter envelope.
1 ounce postage to the UK is $1.20
You could put a lot of them in an envelope and not exceed 1 ounce
This email address is being protected from spambots. You need JavaScript enabled to view it.
Where the Yamaha Enduro is still a current model...
Where the Yamaha Enduro is still a current model...
The following user(s) Liked this Post: MarkT
Please Log in or Create an account to join the conversation.
- Jammyyammy
- Topic Author
- Offline
- Elite Member
- Posts: 279
- Likes received: 58
Replied by Jammyyammy on topic 1975 DT400B (USA model) decompression valve 'O' ring - UK
Hi Biggles,
I bought my o-ring from Deet. I also bought a spring, nut and large washer for the decompression valve from him. All fitted now...
The o-ring is a regular circular cross section - it isn’t square/rectangular/etc...
I didn’t measure it before I fitted it. Sorry...
I bought my o-ring from Deet. I also bought a spring, nut and large washer for the decompression valve from him. All fitted now...
The o-ring is a regular circular cross section - it isn’t square/rectangular/etc...
I didn’t measure it before I fitted it. Sorry...
25 Apr 2021 10:24
#8
Please Log in or Create an account to join the conversation.
- Biggles
- Offline
- Junior Member
- Posts: 17
- Likes received: 5
Replied by Biggles on topic 1975 DT400B (USA model) decompression valve 'O' ring - UK
Thanks Jammy,
mine came in the post from Deet too!
mine came in the post from Deet too!
03 May 2021 04:39
#9
Please Log in or Create an account to join the conversation.
Moderators: yamadmin, Makotosun, DEET, Vinnie, James Hart