×
Pictures Posting Not Working (12 Jun 2023)
Picture uploads is again unavailable. We are working on the problem. Thanks for your patience.
Makotosun
DT400b - speedo light...
- Jammyyammy
-
Topic Author
- Offline
- Elite Member
-
- Posts: 279
- Likes received: 59
- Gr8uncleal
-
- Away
- Site Supporter
-
- Posts: 4703
- Likes received: 2533
Replied by Gr8uncleal on topic DT400b - speedo light...
As long as the rubber bulb holder matches the size of the hole in the speedo, then more or less anything can be used, from any manufacturer.
Standard Yamaha wire colours would be black and blue and I am attaching the image from CMSNL.
I think that I have seen generic ones on the Yambits site here in the UK, or you could make up your own. Obviously make sure that the wires are long enough!
If you get stuck (and you're in the UK), I've probably got enough spare parts to put one together.
www.cmsnl.com/yamaha-dt360-1974-usa_mode...353630/#.YBRJxUNxdaQ
Standard Yamaha wire colours would be black and blue and I am attaching the image from CMSNL.
I think that I have seen generic ones on the Yambits site here in the UK, or you could make up your own. Obviously make sure that the wires are long enough!
If you get stuck (and you're in the UK), I've probably got enough spare parts to put one together.www.cmsnl.com/yamaha-dt360-1974-usa_mode...353630/#.YBRJxUNxdaQ
Please Log in or Create an account to join the conversation.
- AirborneSilva
-
- Offline
- Platinum Member
-
- Posts: 1412
- Likes received: 694
Moderators: yamadmin, Makotosun, DEET, Vinnie, James Hart