Does anyone know if there is a Yamaha alternative to the now discontinued intake hose clamps? Original part number was 308-14455, supersession to 90460-54062.

If forced into a corner, I could use jubilee clips. However, I would prefer something that at least looks original.

I could be persuaded into buying a used pair from the US if the price and postage was reasonable!

Many thanks.

Alan

Reading your plea, I ran out to my garage and took a look. I have a set but it’s for a SC500, larger diameter, darn.
I do have a set from my CB500, they look similar but I’m not sure if the diameter Will work.
Max opening, 51mm, closed-47mm.

Thanks.

I'll go and have a measure up after tea.

I can't believe that Yamaha continue production of some clamps but not others, and also that the dimensions aren't shown like on a load of other parts.

Looks like there should be a couple of kinks in the item, to enable the "inner" element to go under the "outer" upon tightening. I've got some clamps that might work, but I'd have to put the kinks in myself - not impossible by any means, but my preference is normally for the correct part.

the clamps are soft, bend easy