×
Pictures Posting Not Working (12 Jun 2023)
Picture uploads is again unavailable. We are working on the problem. Thanks for your patience.
Makotosun
My first mono-shock
- Schu
-
Topic Author
- Offline
- Site Supporter
-
- Posts: 1816
- Likes received: 2261
Replied by Schu on topic My first mono-shock
Thanks Mark. I will do that when I remove the swing arm to clean and grease the pivots. Which I plan to do when I buy new tires and tubes. Yamaha no longer sells that bump stopper and I don’t see one on eBay either. So the search begins!
STOPPER, BUMP
2A6-22493-00-00
EDIT:
found it at CMSNL
STOPPER, BUMP
2A6-22493-00-00
EDIT:
found it at CMSNL
Schu
CT1B, CT1C, JT1, JT2, CT2, RT3, DT360A (2), GT80B, DT100B, DT125B, DT175B, DT175C, DT250B (2), DT400B, DT175E, Z50
Someday, you'll own some Yamahas
CT1B, CT1C, JT1, JT2, CT2, RT3, DT360A (2), GT80B, DT100B, DT125B, DT175B, DT175C, DT250B (2), DT400B, DT175E, Z50
Someday, you'll own some Yamahas
Please Log in or Create an account to join the conversation.
- MarkT
-
- Away
- Site Supporter
-
- Posts: 14983
- Likes received: 11321
Replied by MarkT on topic My first mono-shock
Here's the thread on rebuilding the shock I just found in the "archives". First step shows how to get to the bump stop. yamaha-enduros.com/index.php/forums/how-...oshock-rebuild#76716
1963 YG1-T, 1965 MG1-T, Allstate 250, 1970 CT1b, 1971 R5, 1973 AT3MX, 1974 TS400L, 1975 RD350, 1976 DT175C, 1976 Husqvarna 250CR, 1981 DT175G, 1988 DT50, 1990 "Super" DT50, 1991 RT180, 2017 XT250
The following user(s) Liked this Post: Schu, Ht1kid
16 Nov 2026 09:44
#12
Please Log in or Create an account to join the conversation.
- MarkT
-
- Away
- Site Supporter
-
- Posts: 14983
- Likes received: 11321
Replied by MarkT on topic My first mono-shock
There is a lot of info there and some info on the bump stops I've used near the end
1963 YG1-T, 1965 MG1-T, Allstate 250, 1970 CT1b, 1971 R5, 1973 AT3MX, 1974 TS400L, 1975 RD350, 1976 DT175C, 1976 Husqvarna 250CR, 1981 DT175G, 1988 DT50, 1990 "Super" DT50, 1991 RT180, 2017 XT250
The following user(s) Liked this Post: Schu
16 Nov 2026 10:07
#13
Please Log in or Create an account to join the conversation.
- RT325
-
- Offline
- Platinum Member
-
- Posts: 11127
- Likes received: 4923
Replied by RT325 on topic My first mono-shock
If the damping feels constant, not all pogo & uncontrolled, i'd just leave it alone. Bump stop of some sort being external is the easy job. By memory you're dealing with about 14 bar or about 200 psi of pressure or more until a hole is drilled in the base to let it escape [that's the easy job]. If it feels pogo then the pressure will have got past into the oil so a whole new ball game. With the spring off try to compress the shock on the floor etc & you'll be surprised how hard it is to push down if its working as normal. We were one of many service agents for yamaha monoshocks back then [in nz], just standard rebuilds not much modifying in the early days. Anyway--just my thoughts!!.
The following user(s) Liked this Post: MarkT, Schu, Ht1kid
16 Nov 2026 18:03
#14
Please Log in or Create an account to join the conversation.
Moderators: yamadmin, Makotosun, DEET, Vinnie, James Hart
