facebook1 youtube1 twitter1 instagram linkedin1 pinterest1

NOTICE:  If you are not a free registered member of the site, you will not see the photos in the forum, and you won't be able to access our premium member content. Please consider joining our community! REGISTER AND MAKE THIS BOX DISAPPEAR!

×

Pictures Posting Not Working (12 Jun 2023)

Picture uploads is again unavailable. We are working on the problem. Thanks for your patience.

Makotosun

DT2MX flywheel puller

  • thumperstew
  • thumperstew's Avatar Topic Author
  • Away
  • Junior Member
  • Junior Member
  • Posts: 24
  • Likes received: 3

DT2MX flywheel puller was created by thumperstew

What flywheel puller for the 72 DT2-MX internal rotor flywheel.  This is the one year setup-internal rotor with point/ not CDI. Appears to use an M18x1.5 puller but ebay listings don't show compatibility with this bike.  Searching the puller shown in Yamaha tools book, page 6, Ref. No 3, part # 908-90011-08-00 gives nothing. 
I'll make one from boring out an M18 old axle and welding a handle if needed. Thanks. 
13 Feb 2026 06:44 #1

Please Log in or Create an account to join the conversation.

  • Posts: 14721
  • Likes received: 10984

Replied by MarkT on topic DT2MX flywheel puller

Let me check on the puller.  I'm pretty sure I have a brand new set of Yamaha points for that ignition.
1963 YG1-T, 1965 MG1-T, Allstate 250, 1970 CT1b, 1971 R5, 1973 AT3MX, 1974 TS400L, 1975 RD350, 1976 DT175C, 1976 Husqvarna 250CR, 1981 DT175G, 1988 DT50, 1990 "Super" DT50, 1991 RT180, 2017 XT250
13 Feb 2026 08:24 #2

Please Log in or Create an account to join the conversation.

Moderators: yamadmin, Makotosun, DEET, Vinnie, James Hart