facebook1 youtube1 twitter1 instagram linkedin1 pinterest1

NOTICE:  If you are not a free registered member of the site, you will not see the photos in the forum, and you won't be able to access our premium member content. Please consider joining our community! REGISTER AND MAKE THIS BOX DISAPPEAR!

×

Pictures Posting Not Working (12 Jun 2023)

Picture uploads is again unavailable. We are working on the problem. Thanks for your patience.

Makotosun

MX250 runaway high idle

  • MarkT
  • MarkT's Avatar
  • Away
  • Site Supporter
  • Site Supporter
  • Posts: 14515
  • Likes received: 10726

Replied by MarkT on topic MX250 runaway high idle

It's a tapered crank just like all the other models...  I wouldn't say "press"....  "seat" is a better term.

This image is hidden for guests.
Please log in or register to see it.



I'm 99.9% certain that there is no locating key.  So you will need to index it when reinstalling so timing adjustment is in range.  Which I mentioned before and would have been a lot easier in my opinion than re-drilling the stator.  So keep that in mind when reinstalling. 
1963 YG1-T, 1965 MG1-T, Allstate 250, 1970 CT1b, 1971 R5, 1973 AT3MX, 1974 TS400L, 1975 RD350, 1976 DT175C, 1976 Husqvarna 250CR, 1981 DT175G, 1988 DT50, 1990 "Super" DT50, 1991 RT180, 2017 XT250
The following user(s) Liked this Post: Ht1kid
15 Jul 2022 06:41 #11

Please Log in or Create an account to join the conversation.

  • Jbeebe
  • Jbeebe's Avatar Topic Author
  • Offline
  • Premium Member
  • Premium Member
  • Posts: 83
  • Likes received: 28

Replied by Jbeebe on topic MX250 runaway high idle

you're right, "seat" is a much better term. Thanks for the tip!

And I agree, repositioning the rotor would have definitely been easier. Either I didn't understand originally or I didn't know how to take the rotor off and I wanted to DO IT NOW! haha. You know how that goes.

I went out to the shop this morning and started making a puller but after a few minutes in the 95% humidity of Pennsylvania's July weather I couldn't stand it anymore, came inside, and ordered the puller online. ha. 
Last edit: 16 Jul 2022 05:58 by Jbeebe.
16 Jul 2022 05:57 #12

Please Log in or Create an account to join the conversation.

Moderators: yamadmin, Makotosun, DEET, Vinnie, James Hart