×
Pictures Posting Not Working (12 Jun 2023)
Picture uploads is again unavailable. We are working on the problem. Thanks for your patience.
Makotosun
Oil - ct3
- Gallotti
- Topic Author
- Offline
- Senior Member
- Posts: 32
- Likes received: 9
Oil - ct3 was created by Gallotti
Morning,
I need some help regarding the type of oil and amount to best lubricate the bike.
Do I just need to see how far it is at the level or do you have any advice?
Thanks
I need some help regarding the type of oil and amount to best lubricate the bike.
Do I just need to see how far it is at the level or do you have any advice?
Thanks
05 May 2021 01:06
#1
Please Log in or Create an account to join the conversation.
- Bartman512
- Offline
- Premium Member
- Posts: 88
- Likes received: 21
Replied by Bartman512 on topic Oil - ct3
You can find all the service info in the Tech Library but the CT3 takes 750cc or nearly 3/4 of a quart of 10w30 in the crankcase.
05 May 2021 04:46
#2
Please Log in or Create an account to join the conversation.
- Mothersbaugh
- Offline
- Platinum Member
- Posts: 1659
- Likes received: 1054
Replied by Mothersbaugh on topic Oil - ct3
"...that is rated for motorcycle wet clutches, and not just any old 10W-30. Non-detergent necessary!
05 May 2021 08:32
#3
Please Log in or Create an account to join the conversation.
- MarkT
- Offline
- Site Supporter
- Posts: 13487
- Likes received: 9345
Replied by MarkT on topic Oil - ct3
Transmission oil as discussed is important but don't forget to keep Autolube tank full of two stroke injector oil (if working) and/or premix oil into the gasoline.
(Forgive me if you know this but I've seen several new owners not realize the engine is lubricated by oil in the fuel)
(Forgive me if you know this but I've seen several new owners not realize the engine is lubricated by oil in the fuel)
1963 YG1-T, 1965 MG1-T, Allstate 250, 1970 CT1b, 1971 R5, 1973 AT3MX, 1974 TS400L, 1975 RD350, 1976 DT175C, 1976 Husqvarna 250CR, 1981 DT175G, 1988 DT50, 1990 "Super" DT50, 1991 RT180, 2017 XT250
05 May 2021 10:30
#4
Please Log in or Create an account to join the conversation.
Moderators: yamadmin, Makotosun, DEET, Vinnie, James Hart