×
Pictures Posting Not Working (12 Jun 2023)
Picture uploads is again unavailable. We are working on the problem. Thanks for your patience.
Makotosun
DT3 Clutch Actuator Blues
- RT325
- Offline
- Platinum Member
- Posts: 9750
- Likes received: 3987
Replied by RT325 on topic DT3 Clutch Actuator Blues
Sorry didn’t see the pic above, so is that a 3 start for a 650 that fits a dt3. I didn’t know they existed. More things to learn.
17 Mar 2021 21:02
#11
Please Log in or Create an account to join the conversation.
- 1971DT250
- Offline
- Site Supporter
- Posts: 1311
- Likes received: 1059
Replied by 1971DT250 on topic DT3 Clutch Actuator Blues
Yes it is a 3 spiral. Some of the XS650 parts were similar or identical to the Enduro.
The hours spent riding my Enduros is not deducted from my life span.
18 Mar 2021 06:23
#12
Please Log in or Create an account to join the conversation.
- mx360guy
- Topic Author
- Offline
- Elite Member
- Posts: 191
- Likes received: 135
Replied by mx360guy on topic DT3 Clutch Actuator Blues
Yep, this little gadget has brought my project to a halt for the moment. I saw a NOS enduro unit sell for $345 on on eBay and its gone now! I could not get the lock nut to budge but I was able to forcefully back out the rod adjusting screw out quite a bit. I hope this will be enough to allow the pressure plate to come up against the clutch plates normally. Dang, that lock nut is really stuck to the actuator body. It is not moving.
If I get binding while under load, I may carefully file down the threads in places to compensate for the expansion of the nylon threads.
If I get binding while under load, I may carefully file down the threads in places to compensate for the expansion of the nylon threads.
18 Mar 2021 12:08
#13
Please Log in or Create an account to join the conversation.
- 1971DT250
- Offline
- Site Supporter
- Posts: 1311
- Likes received: 1059
Replied by 1971DT250 on topic DT3 Clutch Actuator Blues
Send me a PM.
The hours spent riding my Enduros is not deducted from my life span.
18 Mar 2021 14:16
#14
Please Log in or Create an account to join the conversation.
Moderators: yamadmin, Makotosun, DEET, Vinnie, James Hart