×
Pictures Posting Not Working (12 Jun 2023)
Picture uploads is again unavailable. We are working on the problem. Thanks for your patience.
Makotosun
piston search
- RobertE
- Topic Author
- Offline
- Junior Member
- Posts: 12
- Likes received: 13
piston search was created by RobertE
Need some help here. I am having a hard time locating a 2nd over piston and rings for my 73 dt250. Everything I see on ebay shows 74 to 78 not being compatible with the 73 model. According to part numbers, they are the same for all those years. Question is, will a 74 piston and rings work for my 73?
22 Dec 2020 14:26
#1
Please Log in or Create an account to join the conversation.
- yamahahaha
- Offline
- Site Supporter
- Posts: 969
- Likes received: 276
Replied by yamahahaha on topic piston search
If you do in fact have a 1973 250 it is called a DT3 NOT a DT250. Try searching DT3 for your piston. Go to Tech Library above and click on to Vin search to verify what you do have
22 Dec 2020 15:03
#2
Please Log in or Create an account to join the conversation.
- MarkT
- Away
- Site Supporter
- Posts: 13555
- Likes received: 9389
Replied by MarkT on topic piston search
You could also try contacting Enduronut... he has a good supply of OEM pistons and rings for sale.
1963 YG1-T, 1965 MG1-T, Allstate 250, 1970 CT1b, 1971 R5, 1973 AT3MX, 1974 TS400L, 1975 RD350, 1976 DT175C, 1976 Husqvarna 250CR, 1981 DT175G, 1988 DT50, 1990 "Super" DT50, 1991 RT180, 2017 XT250
22 Dec 2020 15:09
#3
Please Log in or Create an account to join the conversation.
- RobertE
- Topic Author
- Offline
- Junior Member
- Posts: 12
- Likes received: 13
Replied by RobertE on topic piston search
This is very interesting. The vin # confirms it to be a DT3. Upon ebay search for piston and rings, it shows several pistons for Dt3, but also indicate they can be used for 74 to 76 Dt250. It makes me wonder why pistons listed for dt250 don't show compatibility for the DT3. At least, I'll be able to get the correct piston. Much thanks for the info.
22 Dec 2020 17:26
#4
Please Log in or Create an account to join the conversation.
- Rick C.
- Offline
- Platinum Member
- Posts: 1082
- Likes received: 915
Replied by Rick C. on topic piston search
Try using the part number . 308-11636-01-00
22 Dec 2020 17:49
#5
Please Log in or Create an account to join the conversation.
- MarkT
- Away
- Site Supporter
- Posts: 13555
- Likes received: 9389
Replied by MarkT on topic piston search
Any chance you could post a link to a piston on ebay that you're describing?
I did a quick look and pretty much all showed they fit the DT3 and the 74-76... I didn't see any that didn't.
Wondering like you're doing is a good thing... a lot of things aren't listed right on ebay and you don't want to end up with something that won't work.
I did a quick look and pretty much all showed they fit the DT3 and the 74-76... I didn't see any that didn't.
Wondering like you're doing is a good thing... a lot of things aren't listed right on ebay and you don't want to end up with something that won't work.
1963 YG1-T, 1965 MG1-T, Allstate 250, 1970 CT1b, 1971 R5, 1973 AT3MX, 1974 TS400L, 1975 RD350, 1976 DT175C, 1976 Husqvarna 250CR, 1981 DT175G, 1988 DT50, 1990 "Super" DT50, 1991 RT180, 2017 XT250
22 Dec 2020 18:07
#6
Please Log in or Create an account to join the conversation.
- Gr8uncleal
- Offline
- Site Supporter
- Posts: 4054
- Likes received: 1981
Replied by Gr8uncleal on topic piston search
Both CMSNL and Partzilla show the piston as fitting 250 bikes from 1972 - 1976 inclusive. Interestingly, they show the part number as 438...... - ie the code for the 1974 DT250A, so probably a supersession (or a mistake?! ). Hopefully Enduronut, DEET etc will read and confirm either way.
Please Log in or Create an account to join the conversation.
- RT325
- Offline
- Platinum Member
- Posts: 9781
- Likes received: 3998
Replied by RT325 on topic piston search
308 sounds like a 360 piston. that'd make it fly--except the fins would fall off.
The following user(s) Liked this Post: Swoop56
Please Log in or Create an account to join the conversation.
- RT325
- Offline
- Platinum Member
- Posts: 9781
- Likes received: 3998
Replied by RT325 on topic piston search
Rendering Error in layout Message/Item: fopen(http://open.api.ebay.com/shopping?callname=GetSingleItem&appid=makotosu-08bc-47da-8e7d-68e3ee6e51ca&siteid=0&responseencoding=JSON&ItemID=124091949895&version=889&trackingid=&trackingpartnercode=9): failed to open stream: Connection refused. Please enable debug mode for more information.
Please Log in or Create an account to join the conversation.
- Bartman512
- Offline
- Premium Member
- Posts: 88
- Likes received: 21
Replied by Bartman512 on topic piston search
Pretty sure Wiseco makes one. I had to bore my jug 4 over and that was the only piston I could find.
27 Dec 2020 05:30
#10
Please Log in or Create an account to join the conversation.
Moderators: yamadmin, Makotosun, DEET, Vinnie, James Hart