facebook1 youtube1 twitter1 instagram linkedin1 pinterest1

NOTICE:  If you are not a free registered member of the site, you will not see the photos in the forum, and you won't be able to access our premium member content. Please consider joining our community! REGISTER AND MAKE THIS BOX DISAPPEAR!

×

Pictures Posting Not Working (12 Jun 2023)

Picture uploads is again unavailable. We are working on the problem. Thanks for your patience.

Makotosun

Cylinder barrel oil line fitting.

  • djetmb
  • djetmb's Avatar Topic Author
  • Offline
  • Junior Member
  • Junior Member
  • Posts: 28
  • Likes received: 3

Cylinder barrel oil line fitting. was created by djetmb

I acquired a CT 2 last fall that had been off the road for some time and was not in running condition. It's now running and I'm sorting out 

some details. Regarding the oil line fitting on the barrel, mine has the bolt with the tapered tip installed. The parts fiche on the CMSNL

website  shows the straight bolt with no tip. 

Can anyone confirm this? I do have a straight bolt in my stash so easily changed. 

There is no evidence of any cylinder bore or piston damage.

Thanks for any help.

 
20 May 2024 15:34 #1

Please Log in or Create an account to join the conversation.

  • Posts: 10828
  • Likes received: 4695

Replied by RT325 on topic Cylinder barrel oil line fitting.

Not sure what you mean by tapered tip which sounds like a bolt to locate into something. Is it hollow. CMSL for CT2 shows the usual bolt on my computer.
The following user(s) Liked this Post: MarkT
20 May 2024 15:48 #2

Please Log in or Create an account to join the conversation.

  • Posts: 10828
  • Likes received: 4695

Replied by RT325 on topic Cylinder barrel oil line fitting.

Unless it's a longer than normal stepped down hollow bolt with extended nose out of something else to put the oil out into the airflow.
The following user(s) Liked this Post: MarkT
20 May 2024 15:50 #3

Please Log in or Create an account to join the conversation.

  • Posts: 254
  • Likes received: 73

Replied by automan on topic Cylinder barrel oil line fitting.

Sounds like a M6 brake fitting to me.

cliff
21 May 2024 08:24 #4

Please Log in or Create an account to join the conversation.

  • djetmb
  • djetmb's Avatar Topic Author
  • Offline
  • Junior Member
  • Junior Member
  • Posts: 28
  • Likes received: 3

Replied by djetmb on topic Cylinder barrel oil line fitting.

I replaced it with the straight bolt listed. The tapered bolt that was in there is a Yamaha part. It is

hollow and has a very small outlet hole. Thanks for the input.
21 May 2024 11:36 #5

Please Log in or Create an account to join the conversation.

Moderators: yamadmin, Makotosun, DEET, Vinnie, James Hart