×
Pictures Posting Not Working (12 Jun 2023)
Picture uploads is again unavailable. We are working on the problem. Thanks for your patience.
Makotosun
Clutch holding tool 73 dt3
- principal282
- Topic Author
- Offline
- Elite Member
- Posts: 238
- Likes received: 71
Clutch holding tool 73 dt3 was created by principal282
Is there a specific tool used to hold it in place while removing/torquing back down? I am gonna get an impact from harbor freight but want to be sure.
I hate to spend money on a tool I will used so sparingly. But I guess people get flat tires etc
73 dt3
I hate to spend money on a tool I will used so sparingly. But I guess people get flat tires etc
73 dt3
02 May 2021 16:24
#1
Please Log in or Create an account to join the conversation.
- tennbamaman
- Offline
- Premium Member
- Posts: 55
- Likes received: 9
Replied by tennbamaman on topic Clutch holding tool 73 dt3
I bought an electric impact wrench and a metric socket set from harbor freight. It broke the clutch nit and the main gear nut loose without any issue. Im just waiting on my oil seal to come in so i can put it all back together.
The following user(s) Liked this Post: principal282
02 May 2021 16:46
#2
Please Log in or Create an account to join the conversation.
- 1971DT250
- Offline
- Site Supporter
- Posts: 1302
- Likes received: 1053
Replied by 1971DT250 on topic Clutch holding tool 73 dt3
Rendering Error in layout Message/Item: fopen(http://open.api.ebay.com/shopping?callname=GetSingleItem&appid=makotosu-08bc-47da-8e7d-68e3ee6e51ca&siteid=0&responseencoding=JSON&ItemID=353117923225&version=889&trackingid=&trackingpartnercode=9): failed to open stream: Connection refused. Please enable debug mode for more information.
Please Log in or Create an account to join the conversation.
- principal282
- Topic Author
- Offline
- Elite Member
- Posts: 238
- Likes received: 71
Replied by principal282 on topic Clutch holding tool 73 dt3
Electric worked good? I'm looking at an air. But a reasonable priced one
02 May 2021 17:20
#4
Please Log in or Create an account to join the conversation.
- tennbamaman
- Offline
- Premium Member
- Posts: 55
- Likes received: 9
Replied by tennbamaman on topic Clutch holding tool 73 dt3
The electric Chicago worked great for me. I tried the $28 dollar air one but i dont think my air line was large enough. It did not break it loose. I took it back and got the electric as i figured for my needs it would be more consistent and just as easy as breaking out air lines. Hooked it to an extension cord. and it broke them loose without any issue. As stated, both my nuts are broke looses and im waiting on seal to arrive.
02 May 2021 17:27
#5
Please Log in or Create an account to join the conversation.
- tennbamaman
- Offline
- Premium Member
- Posts: 55
- Likes received: 9
Replied by tennbamaman on topic Clutch holding tool 73 dt3
im guessing with the right amount of volume and air, the air impact would have worked as well
02 May 2021 17:28
#6
Please Log in or Create an account to join the conversation.
- 1971DT250
- Offline
- Site Supporter
- Posts: 1302
- Likes received: 1053
Replied by 1971DT250 on topic Clutch holding tool 73 dt3
This works great. There are many other brands and larger ones.
www.amazon.com/Milwaukee-2853-22-FUEL-Im...id=1620002367&sr=8-4
I use power tools just to initially loosen. If you spin nuts, bolts and screws too fast it will gall the threads.
www.amazon.com/Milwaukee-2853-22-FUEL-Im...id=1620002367&sr=8-4
I use power tools just to initially loosen. If you spin nuts, bolts and screws too fast it will gall the threads.
The hours spent riding my Enduros is not deducted from my life span.
The following user(s) Liked this Post: principal282
Please Log in or Create an account to join the conversation.
- principal282
- Topic Author
- Offline
- Elite Member
- Posts: 238
- Likes received: 71
Replied by principal282 on topic Clutch holding tool 73 dt3
I went with the porter cable from Amazon tons of torque I wanna say over 500' lbs and about 90 bucks
03 May 2021 07:20
#8
Please Log in or Create an account to join the conversation.
Moderators: yamadmin, Makotosun, DEET, Vinnie, James Hart