facebook1 youtube1 twitter1 instagram linkedin1 pinterest1

NOTICE:  If you are not a free registered member of the site, you will not see the photos in the forum, and you won't be able to access our premium member content. Please consider joining our community! REGISTER AND MAKE THIS BOX DISAPPEAR!

×

Pictures Posting Not Working (12 Jun 2023)

Picture uploads is again unavailable. We are working on the problem. Thanks for your patience.

Makotosun

Q on Piston/Wall clearance

  • pabdt
  • pabdt's Avatar Topic Author
  • Offline
  • Elite Member
  • Elite Member
  • Posts: 266
  • Likes received: 118

Replied by pabdt on topic Q on Piston/Wall clearance

Wait a minute... you didn't write the manual?  

This image is hidden for guests.
Please log in or register to see it.

  I'll hunt it down and check it out.  THanks. again.
74 DT 360 ... resto in progress.
Last edit: 07 Apr 2021 18:04 by pabdt.
07 Apr 2021 17:52 #11

Please Log in or Create an account to join the conversation.

  • Posts: 13475
  • Likes received: 9335

Replied by MarkT on topic Q on Piston/Wall clearance

Thanks RT325....  yes I had a typo...  too early this morning.  Meant standard bore would have been max 80.005mm with a 96 piston.  Went back and fixed it.

This image is hidden for guests.
Please log in or register to see it.

1963 YG1-T, 1965 MG1-T, Allstate 250, 1970 CT1b, 1971 R5, 1973 AT3MX, 1974 TS400L, 1975 RD350, 1976 DT175C, 1976 Husqvarna 250CR, 1981 DT175G, 1988 DT50, 1990 "Super" DT50, 1991 RT180, 2017 XT250
The following user(s) Liked this Post: RT325
Last edit: 07 Apr 2021 17:53 by MarkT.
07 Apr 2021 17:52 #12

Please Log in or Create an account to join the conversation.

  • pabdt
  • pabdt's Avatar Topic Author
  • Offline
  • Elite Member
  • Elite Member
  • Posts: 266
  • Likes received: 118

Replied by pabdt on topic Q on Piston/Wall clearance

not sure where my reply went, but thanks to both of ya for the help.   I visited the local cylinder/piston guru today and we decided to go 0.25 over.   Guy does the local work for the dealerships.   Meticulous Metals is the name of shop.  Loomis, CA.

Thanks again.
74 DT 360 ... resto in progress.
The following user(s) Liked this Post: RT325
07 Apr 2021 18:01 #13

Please Log in or Create an account to join the conversation.

Moderators: yamadmin, Makotosun, DEET, Vinnie, James Hart