facebook1 youtube1 twitter1 instagram linkedin1 pinterest1

NOTICE:  If you are not a free registered member of the site, you will not see the photos in the forum, and you won't be able to access our premium member content. Please consider joining our community! REGISTER AND MAKE THIS BOX DISAPPEAR!

×

Pictures Posting Not Working (12 Jun 2023)

Picture uploads is again unavailable. We are working on the problem. Thanks for your patience.

Makotosun

Fuel line

  • Posts: 915
  • Likes received: 1252

Replied by Enduronut on topic Fuel line

.

Unfortunately, I don't have time to research this question to the fullest extent right now, but YES . . .

From memory, pretty much all AT, CT, DT , and RT Enduro models through, at least 1973, were delivered with the molded fuel line hose (part number 214-24311-00)

The exception's were the smaller JT's, HT's, and LT's models.

So . . . . don't think you really need one of these hoses to be "concours" correct on a HT1 or HT1b model.
Also, not even sure the (214) hose would fit the HT1 fuel valve, as i believe the hose diameter might have been smaller on those smaller models.



.
Control your thoughts . . . or your thoughts will control you!.!
Don't aim . . . and you'll hit your target every time!
A wise man knows . . . he isn't!
Failure squared . . . equals success!
The following user(s) Liked this Post: Devin, MarkT, mdscott, nhsteve, Schu
Last edit: 24 Jan 2021 13:14 by Enduronut.
24 Jan 2021 12:53 #11

This message has an attachment image.
Please log in or register to see it.

Please Log in or Create an account to join the conversation.

  • Posts: 13392
  • Likes received: 9258

Replied by MarkT on topic Fuel line

Thanks EN!!!

And you answered another question... no need for anyone to make reproductions because it looks like you have a pretty good supply of hoses for those who want/need to be 100% correct! :)
1963 YG1-T, 1965 MG1-T, Allstate 250, 1970 CT1b, 1971 R5, 1973 AT3MX, 1974 TS400L, 1975 RD350, 1976 DT175C, 1976 Husqvarna 250CR, 1981 DT175G, 1988 DT50, 1990 "Super" DT50, 1991 RT180, 2017 XT250
The following user(s) Liked this Post: Enduronut, Snglsmkr
24 Jan 2021 13:17 #12

Please Log in or Create an account to join the conversation.

  • Dennis D
  • Dennis D's Avatar Topic Author
  • Offline
  • Elite Member
  • Elite Member
  • Posts: 197
  • Likes received: 68

Replied by Dennis D on topic Fuel line

Thanks EN, problem solved!
25 Jan 2021 10:08 #13

Please Log in or Create an account to join the conversation.

  • Posts: 1403
  • Likes received: 1279

Replied by DEET on topic Fuel line

I have one of the smaller diameter Yamaha hoses. It looks to be around 3/16" I.D. It is too small for the bigger enduro carb inlets.
This is a new one from Yamaha.
I only have this one. I bought it in hopes it would replace the 214 fuel hose.

This email address is being protected from spambots. You need JavaScript enabled to view it.



This email address is being protected from spambots. You need JavaScript enabled to view it.

Where the Yamaha Enduro is still a current model...
The following user(s) Liked this Post: MarkT, nhsteve
Last edit: 27 Jan 2021 20:10 by DEET.
27 Jan 2021 20:08 #14

This message has attachments images.
Please log in or register to see it.

Please Log in or Create an account to join the conversation.

  • Posts: 383
  • Likes received: 199

Replied by nhsteve on topic Fuel line

EN I may be contacting you for one of those!!
28 Jan 2021 11:52 #15

Please Log in or Create an account to join the conversation.

Moderators: yamadminMakotosunDEETVinnieJames Hart