×
Pictures Posting Not Working (12 Jun 2023)
Picture uploads is again unavailable. We are working on the problem. Thanks for your patience.
Makotosun
1972 LT2 Right Hand Crank Seal
- Stanley
-
Topic Author
- Offline
- New Member
-
- Posts: 2
- Likes received: 0
1972 LT2 Right Hand Crank Seal was created by Stanley
I'm replacing the right hand crank seal on my Lt2. The existing seal has a lip on each side and the replacement seal only has one lip. I'm trying to figure out if the replacement seal is correct and possibly the existing seal is the wrong one and if the single lip seal installs with the lip facing the bearing. Thanks for the help
04 Aug 2020 22:14
#1
This message has an attachment image.
Please log in or register to see it.
Please Log in or Create an account to join the conversation.
- shyted
-
- Offline
- Site Supporter
-
- Posts: 1067
- Likes received: 675
Replied by shyted on topic 1972 LT2 Right Hand Crank Seal
Hi Stanley.
The genuine Yamaha seals on my CT3 are double lipped and i'm sure that MarkT has said in one of his posts about the double lip before.
Is the replacement seal a genuine part or not?
You can get double lip seals from bearing suppliers . SKF and Gates do them as i have those too.
The genuine Yamaha seals on my CT3 are double lipped and i'm sure that MarkT has said in one of his posts about the double lip before.
Is the replacement seal a genuine part or not?
You can get double lip seals from bearing suppliers . SKF and Gates do them as i have those too.
04 Aug 2020 23:21
#2
Please Log in or Create an account to join the conversation.
- Stanley
-
Topic Author
- Offline
- New Member
-
- Posts: 2
- Likes received: 0
Replied by Stanley on topic 1972 LT2 Right Hand Crank Seal
Rendering Error in layout Message/Item: fopen(http://open.api.ebay.com/shopping?callname=GetSingleItem&appid=makotosu-08bc-47da-8e7d-68e3ee6e51ca&siteid=0&responseencoding=JSON&ItemID=173219294220&version=889&trackingid=&trackingpartnercode=9): failed to open stream: php_network_getaddresses: getaddrinfo failed: Name or service not known. Please enable debug mode for more information.
Please Log in or Create an account to join the conversation.
Moderators: yamadmin, Makotosun, DEET, Vinnie, James Hart
