facebook1 youtube1 twitter1 instagram linkedin1 pinterest1

NOTICE:  If you are not a free registered member of the site, you will not see the photos in the forum, and you won't be able to access our premium member content. Please consider joining our community! REGISTER AND MAKE THIS BOX DISAPPEAR!

×

Pictures Posting Not Working (12 Jun 2023)

Picture uploads is again unavailable. We are working on the problem. Thanks for your patience.

Makotosun

68 DT1 rescued…parts needed!

  • Pedalcrazy
  • Pedalcrazy's Avatar Topic Author
  • Offline
  • Platinum Member
  • Platinum Member
  • Posts: 689
  • Likes received: 452

Replied by Pedalcrazy on topic 68 DT1 rescued…parts needed!

Thanks SWM…checked it out but was sold. I usually just search DT and RT. That was an AT. I guess I’ll do some more research and see if it is the same part number. Would widen my net if correct. Thanks much for the tip!
1978 DT400E
1976 DT400C
1973 RT3
1971 RT1B
1968 DT1 (3)
15 Jan 2022 08:21 #31

Please Log in or Create an account to join the conversation.

  • Posts: 348
  • Likes received: 441

Replied by JGersh on topic 68 DT1 rescued…parts needed!

I looked at my parts guides and the strap has the same number AT,CT,DT and RT. I would have thought the AT,CT would have been a little shorter…
2 - ‘68 DT1
‘70 RT1
‘70 CT1-B
2 - ‘70 HT-1’s
‘12 Triumph Scrambler
The following user(s) Liked this Post: Pedalcrazy
Last edit: 15 Jan 2022 09:14 by JGersh.
15 Jan 2022 09:14 #32

Please Log in or Create an account to join the conversation.

  • Posts: 929
  • Likes received: 1293

Replied by Pete-RT1 on topic 68 DT1 rescued…parts needed!

"I would have thought the AT,CT would have been a little shorter… "
My RT1 and CT1-B have the same strap, approx 11" long.
The RT1 attaches to the frame in the middle whereas the CT1-B attaches to the left side of the frame, hence the same length.
Yamaha CT1-B
Yamaha CT1-C
Yamaha AT1-E
Yamaha AT1-C
Yamaha CT3
1978 Yamaha DT175MX
2020 Honda CB500X
The following user(s) Liked this Post: MarkT, JGersh, Pedalcrazy
Last edit: 15 Jan 2022 11:45 by Pete-RT1.
15 Jan 2022 11:43 #33

Please Log in or Create an account to join the conversation.

  • Posts: 13481
  • Likes received: 9342

Replied by MarkT on topic 68 DT1 rescued…parts needed!

I thought someone had reproductions?

Can’t remember 
1963 YG1-T, 1965 MG1-T, Allstate 250, 1970 CT1b, 1971 R5, 1973 AT3MX, 1974 TS400L, 1975 RD350, 1976 DT175C, 1976 Husqvarna 250CR, 1981 DT175G, 1988 DT50, 1990 "Super" DT50, 1991 RT180, 2017 XT250
15 Jan 2022 11:54 #34

Please Log in or Create an account to join the conversation.

  • Posts: 296
  • Likes received: 181

Replied by swm on topic 68 DT1 rescued…parts needed!

Mark,
You're spot on, someone sold reproduction seat straps 2-3 years ago,
I bought at least one and great match to originals, but believe they sold out sometime ago.
Thanks,
Steve
 
15 Jan 2022 12:14 #35

Please Log in or Create an account to join the conversation.

  • Posts: 348
  • Likes received: 441

Replied by JGersh on topic 68 DT1 rescued…parts needed!

I think it may have been D’s Cycle Connection in Texas. I messaged them and they replied that they do not have any.
2 - ‘68 DT1
‘70 RT1
‘70 CT1-B
2 - ‘70 HT-1’s
‘12 Triumph Scrambler
15 Jan 2022 12:27 #36

Please Log in or Create an account to join the conversation.

  • Posts: 1120
  • Likes received: 696

Replied by Swoop56 on topic 68 DT1 rescued…parts needed!

I recall repro's being sold . As I recall it was John *****  ( forget his surname )
from North West Vintage Spares ( or very similar name ) , and he has since closed
up shop .
15 Jan 2022 12:47 #37

Please Log in or Create an account to join the conversation.

  • Posts: 296
  • Likes received: 181

Replied by swm on topic 68 DT1 rescued…parts needed!

Swoop56,
Yes, John Groom at NWVC, when John retired I believe he sold inventory to D's Cycle.
Thanks

 
The following user(s) Liked this Post: Swoop56, JGersh
15 Jan 2022 13:10 #38

Please Log in or Create an account to join the conversation.

Moderators: yamadmin, Makotosun, DEET, Vinnie, James Hart