×
Pictures Posting Not Working (12 Jun 2023)
Picture uploads is again unavailable. We are working on the problem. Thanks for your patience.
Makotosun
RT1B ignition
- shyted
- Topic Author
- Offline
- Site Supporter
- Posts: 1052
- Likes received: 662
RT1B ignition was created by shyted
Has anyone fitted electronic ignition to their RT1B and if so who's kit did you use and do you have a product number ?
I see Powerhouse Vape do an AC & DC version for the DT 360 .
Dave
I see Powerhouse Vape do an AC & DC version for the DT 360 .
Dave
12 Sep 2021 02:49
#1
Please Log in or Create an account to join the conversation.
- MarkT
- Offline
- Site Supporter
- Posts: 13494
- Likes received: 9346
Replied by MarkT on topic RT1B ignition
You'll likely want the VAPE DC kit unless you don't plan running turn signals or horn.
1963 YG1-T, 1965 MG1-T, Allstate 250, 1970 CT1b, 1971 R5, 1973 AT3MX, 1974 TS400L, 1975 RD350, 1976 DT175C, 1976 Husqvarna 250CR, 1981 DT175G, 1988 DT50, 1990 "Super" DT50, 1991 RT180, 2017 XT250
12 Sep 2021 05:45
#2
Please Log in or Create an account to join the conversation.
- shyted
- Topic Author
- Offline
- Site Supporter
- Posts: 1052
- Likes received: 662
Replied by shyted on topic RT1B ignition
Yes Mark with both.
Had a feeling it would be that one but wasn't hundred percent sure .
Thank you
Dave.
Had a feeling it would be that one but wasn't hundred percent sure .
Thank you
Dave.
12 Sep 2021 15:24
#3
Please Log in or Create an account to join the conversation.
- RT325
- Offline
- Platinum Member
- Posts: 9713
- Likes received: 3966
Replied by RT325 on topic RT1B ignition
Just fit a "79 DT250 cdi mag complete with cdi box & coil, unless you want 12 volt. Had something similar on my RT2, no kickback any more. "78 DT400 would be the same, just couldn't find it under "79. Early 400's & 360A had terrible pulser system so dodge those ones if you can.
www.partzilla.com/catalog/yamaha/motorcy...dt250f/c-d-i-magneto
www.partzilla.com/catalog/yamaha/motorcy...dt250f/c-d-i-magneto
Please Log in or Create an account to join the conversation.
Moderators: yamadmin, Makotosun, DEET, Vinnie, James Hart