facebook1 youtube1 twitter1 instagram linkedin1 pinterest1

NOTICE:  If you are not a free registered member of the site, you will not see the photos in the forum, and you won't be able to access our premium member content. Please consider joining our community! REGISTER AND MAKE THIS BOX DISAPPEAR!

×

Pictures Posting Not Working (12 Jun 2023)

Picture uploads is again unavailable. We are working on the problem. Thanks for your patience.

Makotosun

DT360 float bowl

  • pahiker
  • pahiker's Avatar
  • Away
  • Elite Member
  • Elite Member
  • Posts: 162
  • Likes received: 125

Replied by pahiker on topic DT360 float bowl

Have you tried dunking the carb in a carb cleaning solution like Berryman chem-dip or using an ultrasonic cleaner? I physically scraped what crud I could get to with a plastic card, then used Berryman to take care of the tiny passages and jets. Ran great afterwards.
1973 Yamaha RT3
2024 Suzuki DR650
2023 Triumph Tiger 1200 GT Pro
05 May 2025 07:53 #11

Please Log in or Create an account to join the conversation.

  • jsmith6752
  • jsmith6752's Avatar Topic Author
  • Offline
  • Elite Member
  • Elite Member
  • Posts: 202
  • Likes received: 30

Replied by jsmith6752 on topic DT360 float bowl

thanks I will give it a shot.....
05 May 2025 08:41 #12

Please Log in or Create an account to join the conversation.

  • Posts: 1626
  • Likes received: 2041

Replied by Schu on topic DT360 float bowl

Just curious. 
Will it start if you hold the throttle wide open when you kick it over?  
Schu

CT1B, CT1C, JT1, JT2, CT2, RT3, DT360A, GT80B, DT100B, DT125B, DT175B, DT175C, DT250B, DT400B, Z50

Someday, you'll own some Yamahas
05 May 2025 15:24 #13

Please Log in or Create an account to join the conversation.

  • jsmith6752
  • jsmith6752's Avatar Topic Author
  • Offline
  • Elite Member
  • Elite Member
  • Posts: 202
  • Likes received: 30

Replied by jsmith6752 on topic DT360 float bowl

can' tell yet the throttle cable broke but thanks
06 May 2025 07:44 #14

Please Log in or Create an account to join the conversation.

  • Posts: 4677
  • Likes received: 2512

Replied by Gr8uncleal on topic DT360 float bowl

I assume that you have the correct carb? It should have 445 stamped on the outside, as well as a banjo bolt fitted into the float bowl, into which the main jet is screwed.

Yamaha DT360 1974 USA CARBURETOR - buy original CARBURETOR spares online
The following user(s) Liked this Post: MarkT, Ht1kid
06 May 2025 09:33 #15

Please Log in or Create an account to join the conversation.

  • jsmith6752
  • jsmith6752's Avatar Topic Author
  • Offline
  • Elite Member
  • Elite Member
  • Posts: 202
  • Likes received: 30

Replied by jsmith6752 on topic DT360 float bowl

good info I will have to check that thanks
06 May 2025 11:23 #16

Please Log in or Create an account to join the conversation.

Moderators: yamadmin, Makotosun, DEET, Vinnie, James Hart