facebook1 youtube1 twitter1 instagram linkedin1 pinterest1

NOTICE:  If you are not a free registered member of the site, you will not see the photos in the forum, and you won't be able to access our premium member content. Please consider joining our community! REGISTER AND MAKE THIS BOX DISAPPEAR!

×

Pictures Posting Not Working (12 Jun 2023)

Picture uploads is again unavailable. We are working on the problem. Thanks for your patience.

Makotosun

compatible inner tubes front fork DT 360 A (1974)

  • Gerryz
  • Gerryz's Avatar Topic Author
  • Offline
  • Senior Member
  • Senior Member
  • Posts: 40
  • Likes received: 5

compatible inner tubes front fork DT 360 A (1974) was created by Gerryz

Hello specialists! I found part no. 278-23124-50 for the inner tubes of my DT 360. Is there another part no. which fits to the DT 360 fork?
06 Mar 2024 11:43 #1

Please Log in or Create an account to join the conversation.

  • Posts: 4017
  • Likes received: 1952

Replied by Gr8uncleal on topic compatible inner tubes front fork DT 360 A (1974)

That part is for the DS7 and R5.

The equivalent part for the DT360A is 291-23124-60. The US parts lists are on the CMSNL and Partzilla websites and the European model uses the same part.
The following user(s) Liked this Post: MarkT, Swoop56, nhsteve
06 Mar 2024 12:23 #2

Please Log in or Create an account to join the conversation.

  • Gerryz
  • Gerryz's Avatar Topic Author
  • Offline
  • Senior Member
  • Senior Member
  • Posts: 40
  • Likes received: 5

Replied by Gerryz on topic compatible inner tubes front fork DT 360 A (1974)

Thx for the correction. I studied the parts list from my DS7.... my fault.... hope I can find better tubes than mine with the correct no.
07 Mar 2024 11:03 #3

Please Log in or Create an account to join the conversation.

  • Gerryz
  • Gerryz's Avatar Topic Author
  • Offline
  • Senior Member
  • Senior Member
  • Posts: 40
  • Likes received: 5

Replied by Gerryz on topic compatible inner tubes front fork DT 360 A (1974)

After a long time of studying webpages and inquieries for hard chrome plating my inner tubes (200 € per tube!!) I decided to search tubes from a newer bike which can fit to the DT360.
Any ideas?
09 Apr 2024 06:37 #4

Please Log in or Create an account to join the conversation.

  • Posts: 1310
  • Likes received: 1059

Replied by 1971DT250 on topic compatible inner tubes front fork DT 360 A (1974)

I have these in 2 of mine. Had to do a little hand fitting but otherwise decent quality. Currently out of stock but check with them on next availability.

www.dcvmx.com/Fork-Tubes/new-dachi-fork-...50-360-400-34mm.html

 
The hours spent riding my Enduros is not deducted from my life span.
09 Apr 2024 08:17 #5

Please Log in or Create an account to join the conversation.

  • Posts: 13502
  • Likes received: 9350

Replied by MarkT on topic compatible inner tubes front fork DT 360 A (1974)

TNK in Italy allegedly makes a lot of fork tubes for thousands of older bikes.  I know they have them for some of the 1970's Yamahas.  I've never been able to find a complete list though. 

Here is a dealer in the UK that has an "enquiry form" and maybe they can come up with something?  motorcycleshockabsorbers.co.uk/order.php
1963 YG1-T, 1965 MG1-T, Allstate 250, 1970 CT1b, 1971 R5, 1973 AT3MX, 1974 TS400L, 1975 RD350, 1976 DT175C, 1976 Husqvarna 250CR, 1981 DT175G, 1988 DT50, 1990 "Super" DT50, 1991 RT180, 2017 XT250
The following user(s) Liked this Post: Ht1kid
09 Apr 2024 10:04 #6

Please Log in or Create an account to join the conversation.

  • Gerryz
  • Gerryz's Avatar Topic Author
  • Offline
  • Senior Member
  • Senior Member
  • Posts: 40
  • Likes received: 5

Replied by Gerryz on topic compatible inner tubes front fork DT 360 A (1974)

Thx for your tipps! It seems not easy to find a pair of new tubes…. I‘m waiting for two more answers from dealers. In the new TNK list are not longer DT models before 1977.

Italian dealer has only these types:
www.omniaracing.net/advanced_search_resu...=tnk+yamaha+dt&lid=4
11 Apr 2024 03:34 #7

Please Log in or Create an account to join the conversation.

  • Posts: 9720
  • Likes received: 3971

Replied by RT325 on topic compatible inner tubes front fork DT 360 A (1974)

Looks like they fit quite a few models right back to "71 looking down the list in this link.

www.cmsnl.com/yamaha-dt250-1974-usa_mode...#pageproductModelfit

Just googling the number came up with this below if still available.

hvccycle.net/yamaha-dt-rt-fork-tubes-291-23124-60-00/
The following user(s) Liked this Post: Snglsmkr
11 Apr 2024 05:03 #8

Please Log in or Create an account to join the conversation.

  • Posts: 13502
  • Likes received: 9350

Replied by MarkT on topic compatible inner tubes front fork DT 360 A (1974)

Great find RT325!  Forgot all about HVC!  They started with street bikes like the RD's and are increasingly getting more parts for the Enduros!  I just got an email from them this morning where they now have the internal clutch damper rubbers for the AT/CT/DT's.  They even have a service to rebuild your clutch basket if you don't want to attempt it yourself. 
1963 YG1-T, 1965 MG1-T, Allstate 250, 1970 CT1b, 1971 R5, 1973 AT3MX, 1974 TS400L, 1975 RD350, 1976 DT175C, 1976 Husqvarna 250CR, 1981 DT175G, 1988 DT50, 1990 "Super" DT50, 1991 RT180, 2017 XT250
The following user(s) Liked this Post: RT325
11 Apr 2024 06:30 #9

Please Log in or Create an account to join the conversation.

  • Posts: 13502
  • Likes received: 9350

Replied by MarkT on topic compatible inner tubes front fork DT 360 A (1974)

GerryZ... if you can, it would be worth it to contact TNK to ask about TNK stock. Many times I've seen a new list but if you contact the manufacturer they still have or will make parts they recently "discontinued".
1963 YG1-T, 1965 MG1-T, Allstate 250, 1970 CT1b, 1971 R5, 1973 AT3MX, 1974 TS400L, 1975 RD350, 1976 DT175C, 1976 Husqvarna 250CR, 1981 DT175G, 1988 DT50, 1990 "Super" DT50, 1991 RT180, 2017 XT250
The following user(s) Liked this Post: Snglsmkr
11 Apr 2024 06:34 #10

Please Log in or Create an account to join the conversation.

Moderators: yamadmin, Makotosun, DEET, Vinnie, James Hart