×
Pictures Posting Not Working (12 Jun 2023)
Picture uploads is again unavailable. We are working on the problem. Thanks for your patience.
Makotosun
74 DT360 Sprocket Advice
- beerens20
- Topic Author
- Offline
- Junior Member
- Posts: 28
- Likes received: 10
74 DT360 Sprocket Advice was created by beerens20
Getting ready to put my 360 back together and am hoping for some advice or direction. The current sprocket setup is 12 teeth in the front and 44 in the rear. In 5th gear to maintain 45-50mph on surface streets I'm way up in the rpm where the bike is screaming at me. I would ideally like to be able to ride 50-55 in 5th at like 3k rpm.
I was thinking of trying a 14 in the front keeping the 44 in the rear. Anyone else have experience with what setup would let me get a bit more top end speed at 3k?
I was thinking of trying a 14 in the front keeping the 44 in the rear. Anyone else have experience with what setup would let me get a bit more top end speed at 3k?
21 May 2022 10:11
#1
Please Log in or Create an account to join the conversation.
- 1971DT250
- Offline
- Site Supporter
- Posts: 1306
- Likes received: 1054
Replied by 1971DT250 on topic 74 DT360 Sprocket Advice
I have 16 tooth on my RT3 regular riders.
The hours spent riding my Enduros is not deducted from my life span.
21 May 2022 11:18
#2
Please Log in or Create an account to join the conversation.
- akara1
- Offline
- Elite Member
- Posts: 200
- Likes received: 274
Replied by akara1 on topic 74 DT360 Sprocket Advice
12/44 = 5500RPM = 55MPH
16/44 = 4200RPM = 55MPH
16/39 = 3700RPM = 55MPH, dont go taller gearing than this, its too "chunky" feeling to take off from a stop.
16/44 = 4200RPM = 55MPH
16/39 = 3700RPM = 55MPH, dont go taller gearing than this, its too "chunky" feeling to take off from a stop.
The following user(s) Liked this Post: Snglsmkr, Ht1kid, beerens20
21 May 2022 13:22
#3
Please Log in or Create an account to join the conversation.
- beerens20
- Topic Author
- Offline
- Junior Member
- Posts: 28
- Likes received: 10
Replied by beerens20 on topic 74 DT360 Sprocket Advice
Thank you. That is a helpful breakdown!
21 May 2022 16:38
#4
Please Log in or Create an account to join the conversation.
- Swoop56
- Offline
- Site Supporter
- Posts: 1120
- Likes received: 696
Replied by Swoop56 on topic 74 DT360 Sprocket Advice
DT 360 stock setup is 15 / 44
21 May 2022 22:53
#5
Please Log in or Create an account to join the conversation.
- Matthew35
- Offline
- Senior Member
- Posts: 33
- Likes received: 23
Replied by Matthew35 on topic 74 DT360 Sprocket Advice
I ran a 16t front on mine and LOVED it. I could run 55-60mph at around 3500 rpm. Just at the beginning of where it really ran nice.
13 Sep 2022 11:06
#6
Please Log in or Create an account to join the conversation.
- Matthew35
- Offline
- Senior Member
- Posts: 33
- Likes received: 23
Replied by Matthew35 on topic 74 DT360 Sprocket Advice
Correction, I was at about 4500 rpm at that speed. But nevertheless. Great gearing for that bike.
26 Sep 2022 06:39
#7
Please Log in or Create an account to join the conversation.
Moderators: yamadmin, Makotosun, DEET, Vinnie, James Hart