Advanced Search

I did the exact same thing today..bought a 278..

The picture of all those actuators stirs deep emotions I dare not speak about....

Well actually, I may do that to my hot rod 250. But on my '73 RT3, I'd like to keep it sort-of original for the restoration.

I HIGHLY recommend the Deet conversion, it eliminates the split nylon that the original Enduros all have.

Yeah I saw pictures of that clutch actuator mod. It certainly will do if nothing else is available.

Yes. Send me a message.

 
 

Friends I've gone down a rat hole trying to find a replacement for that pesky "push lever assy" 213-16340-00". I've combed this site and the rest of the internet and can't see to find a source for that part. I mistakenly ordered 278-16340 but it doesn't fit. It has 4 screw threds. Does anyone know of a source?
 

Hi all,
Finally getting around to working on the DT3. I got spark now so onward. I put a new clutch cable on. As with everything on this bike it was petrified. Hooked it up and no action with the clutch..Ok it's stuck too so off comes the cover. All looks pretty clean but it looks like it is missing some plates..Thats kinda odd but it is what it is. Took the the plates off and noticed that the Pushrod #1 (that's what the manual calls it) was not moving out when I pulled in the lever. The long push rod (#2) was not making contact with #1 and yes the ball was there. Long story short, I destroyed the actuator trying to get the lock bolt and adjustment screw lose, petrified. This would be a good place to insert the "ugg ") I figured the screw was not turned in far enough and proceeded to bend the poor thing out of shape by whacking it with an impact driver...that was not a good idea..Those things are hard to find and new ones if you find them are really expensive. So I am looking for old covers from salvage yards that still have the actuator assembly intact. The push rod issue is kinda baffling. Maybe the #2 is not long enough; not the right one for that bike, anything is possible. I have a Wisco piston coming, I have a new carb ready to intstall, nice fork tubes to replace the rusty ones.

Question; are the rubber cushion rings needed? There is only one and Barnett replacement plates don't seem to have them. I see different models in the manual don't have them either.
 

Rendering Error in layout Search/Results/Row: fopen(http://open.api.ebay.com/shopping?callname=GetSingleItem&appid=makotosu-08bc-47da-8e7d-68e3ee6e51ca&siteid=0&responseencoding=JSON&ItemID=383526401474&version=889&trackingid=&trackingpartnercode=9): failed to open stream: Connection refused. Please enable debug mode for more information.
Displaying 201 - 210 out of 275 results.